Publications
Clean Combustion
2023
2022
2021
2021. ERRATUM: “Versailles project on advanced materials and standards interlaboratory study on intensity calibration for x-ray photoelectron spectroscopy instruments using low-density polyethylene” [J. Vac. Sci. Technol. A 38, 063208 (2020)]. Journal of Vacuum Science & Technology A. 027001-027001 39.2 

2020
2019
2018
2018. Coal liquid based high crystalline carbons for the synthesis of graphene-based composites: CoalPhenes. Final Report.
2017
2017. Carbon capture: Whole system experimental and theoretical modeling investigation of the optimal CO2 stream composition in the carbon capture and sequestration chain. In: Mujtaba IM; Srinivasan R; Elbashir NO (eds.) The Water-Food-Energy Nexus: Processes, Technologies, and Challenges. Green Chemistry and Chemical Engineering.



2017. X-ray Photoelectron Spectroscopy. In: Wang Z; Wille U; Juaristi E (eds.) Encyclopedia of Physical Organic Chemistry.
Awad AT; Wen D (2017) Latent and sensible energy storage enhancement of nitrate salt with same size of two different types of nanoparticles ICHEME conference, UK Particle Technology Forum 29 Mar 2017
Awad AT; Wen D (2017) Latent and sensible energy storage enhancement of nitrate salt with same size of two different types of nanoparticles ICHEME conference, UK Particle Technology Forum 2017
Awad AT; Wen D (2017) Latent and Sensible Energy Storage Enhancement AEM2017 conference
Dong Z; Meng J; Yuan G; Cong Y; Zhang J; Li X; Westwood AVK (2017) Synthesis of SiC nanowires via pyrolysis of silicon-containing carbon materials Carbon 2017
Raza MA; Westwood AVK; Stirling C (2017) Graphite nanoplatelet/carbon nanofiber-based hybrid epoxy composites for thermal interface applications Carbon 2017
2016 & previous
2013. Special issue - Computer Aided Process Engineering (CAPE) tools for a sustainable world.
2004. LANTERN - Leeds health Air pollution, Noise, Traffic and Emissions Research Network.
2003. Joining of advanced and speciality materials V.
2004. Smithells Metals Reference Book.
1999. Combustion and Gasification of Coal.
1995. Interactions of fast explosions with an obstacle. Book : Government publication : English. Health and Safety Executive, Offshore Technology Report OTI 94 625.
2001. Carbon Ceramic Alloys.
2009. Energy technology transitions for industry.
2010. Energy Technology Perspectives: Scenarios and Strategies to 2050.
2007. Condensable and Gaseous Hydrocarbon Emissions and Their Speciation for a Real World SI Car Test. In: Engineers SOA (eds.) SAE Proceedings of Fuels and Emissions Conference. SAE Technical Paper Series 2007-01-0062.
1998. An adaptive CFD solver for time-dependent environmental flow problems. In: Morton KW; Baines MJ (eds.) Numerical methods for fluid dynamics V.
2001. Unstructured mesh adaptive MOL solvers for atmospheric reacting flow problems. In: Wouwer AV; Saucez P; Schiesser WE (eds.) The Adaptive Method of Lines.
1997. The chemistry and kinetics of formation of chlorinated compounds during the post combustion conditions. In: First International Symposium on Incineration and Flue Gas Treatment Technologies.
1999. The atmosphere. In: Harrison RM (eds.) Understanding our environment 3rd edition.
2009. Comparison of Real World Emissions in Urban Driving for Euro 1-4 vehicles using a PEMS that measures legislated gaseous emissions. In: SAE Book SP-2256: Emissions Measurement and Testing.
2010. Driver Variability Influences on Real World Emissions at a Road Junction using a PEMS. In: SAE Book SP-2289: Emissions Measurement and Testing, 2010.
2002. Methane emissions from natural gas fired domestic boilers and space heaters. In: Clean Air: Energy, Combustion and the Environment.
1996. The importance of prompt-NO formation and of NO reconversion in strained laminer binary rich partially premixed flames.. In: Chan SH (eds.) Transport Phenomena in Combustion.
2002. Velocity Measurements in Impinging Turbulent Jets using Particle Image Velocimetry. In: Greated C; Cosgrove J; Buick JM (eds.) Optical Methods for Data Processing in Heat and Fluid Flow.
1997. Advance modelling of coal combustion. In: 9th International Conference on Coal Science.
1997. A review of NOx formation and reduction mechanism in combustion systems with particular reference to coal. In: Third International Conference on Combustion and Emission Control.
2009. The Influence of Fuel Pre-heating on Combustion and Emissions with 100% Rapeseed Oil for a DI Diesel Engine. In: SAE Book SP-2237: CI Engine Performance for use with Alternative Fuels.
2004. Influence of oil age on particulate size distributions with an on- line oil recycler from an IDI passenger car diesel engine. In: Engineers SOA (eds.) SP-1899: Emissions Measurement and Testing, Advanced Catalysts and Substrates, and Diesel Gaseous Emissions.. SAE Technical Paper Series 2004-01-2905.
2007. Study of Emissions and Combustion Characteristics of RME B100 Biodiesel from a Heavy Duty DI Diesel Engine. In: Engineers SOA (eds.) Proceedings of SAE Fuels and Emissions Conference. SAE Technical Paper Series 2007-01-0074.
2007. Impact of Traffic Conditions and Road Geometry on Real World Urban Emissions using a SI Car. In: Engineers SOA (eds.) SP-2089: Emission measurement and testing 2007. SAE Technical Paper Series 2007-01-0308.
2008. Comparisons of the Exhaust Emissions for Different Generations of SI Cars under Real World Urban Driving Conditions. In: Emissions Measurement and Testing, 2008.
2008. Study of Thermal Characteristics and Emissions during Cold Start using an on-board Measuring Method for Modern SI Car Real World Urban Driving. In: SAE Book SP2207: SI and CI Engine Cold Start and Transient Emissions and Controls.
2008. Comparison of Exhaust emissions and Particulate Size Distribution for Diesel, Biodiesel and Cooking oil using a Heavy Duty DI Diesel Engine. In: Renewable Fuels.
2009. Investigation of Aldehyde and VOC Emissions during Cold Start and Hot Engine Operations using 100% Biofuels for a DI Engine. In: SAE Book SP-2256: Emissions Measurement and Testing.
2001. Carbon-ceramic alloys. In: Rand B; Appleyard SP; Yardim MF (eds.) Design and Control of Structure of Advanced Carbon Materials for Enhanced Performance. NATO Science Series E: Applied Sciences.
2006. The Atmosphere. In: Harrison RM (eds.) An Introduction to Pollution Science.
1998. Electron-Yield X-Ray Absorption Spectroscopy in Gaseous Environments. In: Clark RJH; Hester RE (eds.) Spectroscopy for Surface Science. Advances in Spectroscopy.
1999. The use of 3-D adaptive unstructured meshes in air pollution modelling.
1999. Low dimensional manifolds and reduced chemical models for air pollution simulations. In: Griebel M; Margenov S; Yalamov P (eds.) Notes on numerical fluid mechanics.
2002. The estimation of intrinsic low dimensional manifold dimension in atmospheric chemical reaction systems.
2002. The combustion of pulverised coal and reduction of the environmental impact. In: Reis A; Ward J; Leukel W (eds.) Proceedings of the 6th European Conference on Industrial Furnaces and Boilers.
2001. The potential of pyrolysis for recycling used tyres. In: Dhir; K R; Limbachiya; C M; Paine; A K (eds.) Recycling and Reuse of Used Tyres.
1998. Microstructural development in nickel-rich NiAl alloys modified with Cr and Ti. ROLL OF CHARACTERIZATION IN UNDERSTANDING ENVIRONMENTAL DEGRADATION OF MATERIALS
1999. Microstructural development in multiphase Ni-Al-Cr-Ti intermetallic alloys derived from beta-NiAl. ANALYSIS OF IN-SERVICE FAILURES AND ADVANCES IN MICROSTRUCTURAL CHARACTERIZATION
2009. RANS modelling and LES of particle deposition in a turbulent square duct flow. TURBULENCE, HEAT AND MASS TRANSFER 6
1997. The removal of H2S from coal gas by calcium oxide: the effect of temperature and residence time on CaO/CaS sintering. Ninth International Conference on Coal Science
1999. The effect of sintering on sulphur capture by limestone and dolomite. 5th International Conference on Combustion Technologies for a Clean Environment
2011. Electrical cable fires using the cone calorimeter for toxic gas investigations. The Sixth International Seminar on Fire and Explosion Hazards
2012. Electrical cable fires using the cone calorimeter for toxic gas investigations. International Conference on Engineering Sciences (ICES2012)
2010. Electrical cable fires using co-burning with pine cribs in a compartment. Fire Related Research and Developments 2010 (Re10)
1997. Side venting versus end venting for large L/D vessel explosions with and without obstacle. Institution of Chemical Engineers Symposium Series
1995. Vented gas explosions in a long vessel with obstacles. Institution of Chemical Engineers Symposium Series
1995. The effect of vent size on pressure generation during explosions in large LD vessels.. 15th International Colloquium on the Dynamics of Explosions and Reactive Systems
1995. Gas explosions in three interlinked vessels. First International Seminar on Fire &Explosion Hazards (ISFEHSVD)
1996. Vent area effects on end-vented gas explosions in a large L/D vessel incorporating a 40% blockage. International Symposium on Hazards Prevention and Mitigation of Industrial Explosions
1996. The effect of length to diameter ratio on side vented gas explosions.. International Symposium on Hazards Prevention and Mitigation of Industrial Explosions
1997. Gas explosions in long open-ended vessels. 16th International Colloquium on the Dynamics of Explosions and Reactive Systems
1997. Single side-vented explosions aggravated by obstacles. Proceedings 16th International Colloquium on the Dynamics of Explosions and Reactive Systems (ICDERS)
2004. Thermal conductivity of dispersion containing carbon nanotubes. Particle Technology UK Forum
2011. Toxic emissions from folded cotton towels in a low ventilation compartment. Sixth International Seminar on Fire and Explosion Hazards
2011. Wood crib fires under high temperature low oxygen conditions. Sixth International Seminar on Fire and Explosion Hazards
2011. Air starved acrylic curtain fire toxic gases using an FTIR. Sixth International Seminar on Fire and Explosion Hazards
2011. Low ventilation pool fires.. Sixth International Seminar on Fire and Explosion Hazards
2012. Low ventilation pool fires. The International Conference on Engineering Sciences (ICES2012)
2008. The development of a technique for the combustion of wood in a high temperature low oxygen compartment fire. The Saudi Arabia Research Innovation Conference
2010. Ghosting flames in a low ventilation compartment with kerosene pool fires. The International Congress "Combustion and Fire Dynamics" CFD2010)
2009. Evaluation of Biodiesel as a Fuel for Use in Gas Turbine Engines on Emissions and Carbon Mitigation. International Conference on Energy, Enviornment and Water Desalnation
2015. Comparison of Particulate Mass and Size Distribution from Wood Pellet and Fired Combustion. INFUB-10: 10th European Conference on Industrial Furnaces and Boilers
2006. Wide-Gap Transient Liquid Phase Bonding of Single Crystal to Polycrystalline Nickel-base Superalloys: Microstructural Development and Mechanical Properties. TRENDS IN WELDING RESEARCH, PROCEEDINGS
2003. Modelling of the Ignition Characteristics of Flammable Jets Using a k-epsilon-gamma Turbulence Model. Proceedings 4th International Symposium on Turbulence, Heat and Mass Transfer
2005. RANS Modelling of the Ignition Characteristics of Flammable Jets. Proceedings of the Second International Conference Fire Bridge 2005
2005. Prediction of the Ignition Characteristics of Flammable Jets Using Intermittency-Based Turbulence Models. Proceedings of the European Combustion Meeting
1996. A comparison between end-vented and side vented gas explosions in large L/D vessels. The Combustion Institute, European Meeting
2010. Fire and Explosion Hazards, 6th International seminar, Proceedings. Sixth International Seminar on Fire and Explosion Hazards
2007. Toxic Gas Measurements using FTIR for Combustion of COH Materials in Air Straved Enclosed Fires. European Combustion Meeting, Crete, 2007
2005. Toxic emissions from air starved fires. SafeAir 2005
2000. Pool fires in a low ventilation enclosure. Institution of Chemical Engineers Symposium Series
2001. The gravimetric determination of soot yields in enclosed pool fires. Third International Seminare on Fire and Explosion Hazards
1999. The influence of lubricating oil age on oil quality and emissions from IDI passenger car diesels. SAE 1999 Congress
2000. The influence of an on line heated lubricating oil recycler on emissions from an IDI passenger car diesel as a function of oil age. SAE 2000 Congress
2008. Toxic Gases in simulated aircraft interior fires using FTIR analysis. 5th International Seminar on Fire and Explosion Hazards
2000. The influence of an oil recycler on lubricating oil quality with oil age for a bus using in-service testing. SAE 2000 World Congress
2012. Explosions after the Sudden Release of Hydrogen into a Large Closed Volume where the Overall Mixture is not Flammable. IX ISHPMIE, International Symposium on Hazard, Prevention and Mitigation of Industrial Explosions
2007. The Use of a Water/Lube Oil Heat Exchanger and Enhanced Cooling Water Heating to Increase Water and Lube Oil Heating Rates in Passenger Cars for Reduced Fuel Consumption and CO2 Emissions During Cold Start. 2007 International Fuels and Lubricants Conference, Kyoto, Japan
2005. Toxic hazards in enclosed air starved fires. SafeAir 2005
2005. The New York TWA Flight 800 Fuel Tank Vapour-Air Explosion 1996. Safeair 2005
2003. Combustion of blends. International Conference on Coal Science
2003. Blending effects on coal burnout and NO emissions. Clean Air 2003. Seventh International Conference on Energy for a Clean Environment, Lisbon
1999. An extended coal combustion model. ICCS'99, 10th International Conference on Coal Science
2002. Modeling the reaction of oxygen with coal and biomass chars. PROCEEDINGS OF THE COMBUSTION INSTITUTE
2012. Local authority interventions in the domestic sector and the role of social networks : a case study from the city of Leeds. Energy and People: Futures, complexity and challenges
2012. Delivering national policy at the local level: The role for local authorities in the implementation of the UKs flagship Green Deal policy. International Sustainable Development Research Conference
2012. Modelling diffusion of energy efficiency measures on a social network: Integration of real world data. EPSRC Complexity Science in the Real World Network - Academic Conference
2009. Measurements of flow and turbulence within and above an urban intersection in central London (DAPPLE 2007 campaign). 8th Symposium on the Urban Environment, 89th American Meteorological Society Annual Meeting
2009. Wind field observations during the DAPPLE 2004 campaign in London. 8th Symposium on the Urban Environment, 89th American Meteorological Society Annual Meeting
2005. The effect of formal mechanism reduction on simulated propane ignition. Proceedings of the European Combustion Meeting, ECM 2005
2005. A Numerical Analysis of the Kinetic Origins of Two-Stage Autoignition and the Dependence of Autoignition Temperature on Reactant Pressure in Lean Alkane-Air Mixtures. Proceedings of the European Combustion Meeting, ECM 2005
2003. Atomisation in Turbulent Flows: Modelling for Application. 3rd International Symposium on Turbulence and Shear Flow Phenomena
2005. Computational fluid dynamic modelling of atomisation processes in turbulent flows. 15th European Symposium on Computer Aided Process Engineering (ESCAPE-15)
2009. Pathways for dispersion in urban areas revealed by the DAPPLE experiments. 8th Symposium on the Urban Environment, 89th American Meteorological Society Annual Meeting
2007. The sensitivity of a 3d street canyon CFD model to uncertainties in input parameters. Proceedings of the 11th International Conference on Harmonisation within Atmospheric Dispersion Modelling for Regulatory Purposes, HARMO 2007
2007. The sensitivity of a 3d street canyon cfd model to uncertainties in input parameters. 11th International Conference on Harmonisation within Atmospheric Dispersion Modelling for Regulatory Purposes
1998. A detailed kinetic analysis of the transition from catalytic to homogeneous combustion of methane-air mixtures. The Twenty-seventh Symposium (International) on Combustion
1998. Detailed kinetic analysis of the transition from catalytic to homogeneous combustion of methane-air mixtures..
2004. Innovative Technology to Meet the Challenge of Agile Manufacture in the Fine Chemicals Industries. Proceedings of the 1st International Conference on Management of Manufacturing Systems
2003. A network model for the design of agile plants. 13th European Symposium on Computer Aided Process Engineering (ESCAPE-13)
2003. A Vision of Computer Aids for the Design of Agile Production Plants. European Symposium on Computer Aided Process Engineering - 13
1996. The composition of flue gas emissions derived from the combustion of tyre pyrolysis oils. CleanTech '96, Brunel University, London, UK
2003. Reduction of a chemical kinetic scheme for carbon monoxide-hydrogen oxidation. European Symposium on Computer Aided Process Engineering, ESCAPE-13
2005. A polynomial repro-model applied to propane cracking. 15th European Symposium on Computer Aided Process Engineering (ESCAPE-15)
2003. Systematic Reduction of a CO-H2 Oxidation Scheme Using Time-Scale Based Methods and Repro-Modeling. Proceedings European Combustion Meeting, ECM2003
1987. Natural Gas Venting and Flaring. Institution of Gas Engineers 53rd Autumn Meeting
1996. Characterisation of the bonding of light element additions in carbonaceous materials using PEELS. Eurem '96
2004. Business and Technical Support for the Design of Agile Production Plants. European Symposium on Computer-Aided Process Engineering - 14
2003. Transient liquid phase joining of Gamma Met PX. GAMMA TITANIUM ALUMINIDES 2003
2003. Transient liquid phase (TLP) bonding of TiAl-Alloys: Wettability, microstructure, mechanical properties and potential for automation. TRENDS IN WELDING RESEARCH, PROCEEDINGS
2003. Wide gap transient liquid phase bonding of TiAl alloys. JOINING OF ADVANCED AND SPECIALTY MATERIALS V, PROCEEDINGS
2004. Characterisation of the < 500nm fraction of airborne particulates using TENT, EDX and EELS. ELECTRON MICROSCOPY AND ANALYSIS 2003
2004. Characterisation of the <500nm fraction of airborne particulates using TEM, EDX and EELS, Electron Microscopy and Analysis. EMAG 2003
2005. Numerical case studies of packed columns using DigiPac. The 7th World Congress of Chemical Engineering
2005. A Numerical Case Study of Packed Columns. European Symposium on Computer-Aided Process Engineering - 15
2006. Validation of a Digital Packing Algorithm for the Packing and Subsequent Fluid Flow Through Packed Columns. 16th European Symposium on Computer Aided Process Engineering
2006. A Numerical Investigation into the Simulated Packing of Multi-Tubular Catalytic Reactors. 5th International Conference for Conveying and Handling of Particulate Solids
2008. Application of a digital packing algorithm to cylindrical pellet-packed beds. 18TH EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING
2006. Validation of a digital packing algorithm for the packing and subsequent fluid flow through packed columns. 16TH EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING AND 9TH INTERNATIONAL SYMPOSIUM ON PROCESS SYSTEMS ENGINEERING
2006. An Investigation into the Mixing and Segregation of Non-Spherical Particles Using a Digital Packing Algorithm. 5th International Conference for Conveying and Handling of Particulate Solids
1997. Emission of volatile organic compounds and chlorinated species from coal-fired combustion equipment. Fourth International Conference on Combustion Technologies for a Clean Environment
1998. Emission of volatile organic compounds from coal combustion. Twenty-seventh Symposiuim (International) on Combustion
1998. The formation of VOCs and PAHs from the spray combustion of heavy fuel oil. ILASS-Europe '98
1999. The formation of toxic organic chemicals from coal and fuel oil combustion. the Joint Meeting of the British, Gerrman and French Section of the Combustion Institute
1999. The formation of VOC, PAH, and dioxins during incineration. 2nd International Symposium on Incineration and Flue Gas Treatment Technologies
2001. Conversion of volatile-nitrogen and char-nitogen to NO during combustion. Division of Fuel Chemistry
2001. The combustion of paper and plastic. Incineration 2001
1997. The oxidative reactivity of coal chars and soot in relation to their structure. The American Chemical Society
2010. Genotoxic effects of particulate matter from a heavy diesel engine using diesel and minimally processed rapeseed oil. 2010 Annual UK Review Meeting on Outdoor and Indoor Air Pollution Research
2008. Hydrogen production from glycerol using an adsorption enhanced reaction process.. 15th Joint the Chinese Society of Chemical Science and Technology in the UK (CSCST-UK) and the Society of Chemical Industry - Chinese UK Section (SCI-CS)
2011. NANOPARTICLE-MEDICATED ULTRASONIC HEATING FOR BIOMEDICAL APPLICATIONS. TMNN-2010 - PROCEEDINGS OF THE INTERNATIONAL SYMPOSIUM ON THERMAL AND MATERIALS NANOSCIENCE AND NANOTECHNOLOGY
1997. Carbon-based materials studied by PEELS. Institute of Physics Conference Series
2005. DAPPLE project update 2005: integration of methods to understand pollutant effects pathways in the urban environment. Proceedings of the 5th International conference on Urban Air Quality
2004. Personal exposure to air pollution at a street canyon intersection: implications for air quality management in the context of sustainable development. Proceedings of the World Clean Air Congress
2004. Dispersion of Air Pollution and Penetration into the Local Environment (DAPPLE): the need for a more robust approach to microscale model validation. Proceedings of the ERCOFTAC Special Interest Group 5 workshop on Urban CFD
1997. Modelling Free and Impacting Underexpanded Jet Fires. Institution of Chemical Engineers, Symposium Series Number 141
1987. Flaring of Natural Gas from Inclined Vent Stacks. IChemE Symposium Series 102
1996. Use of EELS to study bonding of light elements in carbon-ceramic alloys. Carbon '96
2009. The temperature controlled cone calorimeter: A bench scale screening tool for furnace testing of intumescent coatings.. 12th European Meeting on Fire Retardant Polymers
2009. Using a modified cone calorimeter to predict the performance of a thermally reactive glazing system in a furnace test.. 12th European Meeting on Fire Retardant Polymers
2000. Evaluation of Participating Media Models for Fire Simulation. Proceedings 6th International Symposium on Fire Safety Science
1995. Predictions of Impacting Supersonic Jets. Proceedings 9th International Conference on Numerical Methods in Laminar and Turbulent Flow
2003. Mathematical Modelling of Jet Fires Stabilised on Sonic Releases. Proceedings 37th Annual Loss Prevention Symposium
2002. Recycling of fibre-reinforced polymeric waste by pyrolysis: thermogravimetric and bench-scale investigations. Pyrolysis 2002, Leoben, Austria
2002. Development of a novel process for the recycling of composite plastic waste. SET for Britain Young Engineers Event, House of Commons, London, UK
2004. Recycling of composite plastics in construction and demolition waste by pyrolysis. Sustainable Waste Management and Recycling
2005. Reactions of PCDD/F in waste incineration flyash. Organohalogen Compounds- Proceedings of Dioxin 2005 and ISPAC-20
2005. Impact of minerals and alkali metals on willow combustion properties. World Renewable Energy Congress
2003. An investigation of alumina supported catalysts for the selective catalytic oxidation of ammonia in biomass gasification. The joint SURCAT, RSC & IChemE Applied Catalysis Group's Meeting
2007. Low-Dimensional manifolds in the spatial dynamics of steady one-dimensional premixed flames. Proceedings of the 1st International workshop on Model Reduction in Reactive Flows
1991. Predictions of a Turbulent Jet Impacting a Flat Surface. Eighth Symposium on Turbulent Shear Flows
1995. Predictions of the Concentration Field of an Impacting Turbulent Jet. Tenth Symposium on Turbulent Shear Flows
1998. Preparation and oxidation resistance of carbon-ceramic alloys. International Symposium on Carbon (Tokyo)
1998. Oxidation resistant carbon-ceramic alloys, Part 3: Oxidation resistance studies. Eurocarbon '98
1998. Oxidation resistant carbon-ceramic alloys, Part 2: Synthesis and characterisation. Carbon as a Material
1999. Novel oxidation resistant carbon alloys. Carbon '99
1996. A General Purpose Computational Fluid Dynamic Code and its Application to Safety Problems. 1995 International Gas Research Conference
2005. Hydrodynamics of gas-solid two-phase flow in a novel system for non-periodic adsorption enahnced chemical reaction processes. 7th World Congress on Chemical Engineering
2004. Nanofluids for heat transfer intensification - where are we and where should we go?. 6th International Symposium on Heat Transfer
2003. Modelling study of urban street canyons. The 12th International Scientific Symposium on Transport and Air Pollution
2007. Evaluation of a Lagrangian model for predicting concentration fluctuations in urban areas. 11th International Conference on Harmonisation within Atmospheric Dispersion Modelling for Regulatory Purposes
2004. Investigation of the flow within urban canopies during the DAPPLE campaign. 5th Conference on the Urban Environment
2008. FUEL 33-Modeling of gas-solid flow and hydrogen production from steam reforming of glycerol in a fluidized bed reactor. ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY
2004. Producing hydrogen using the unmixed reforming process.. The Combustion Institute Spring Meeting 2004
2006. Steam reforming of sunflower oil for hydrogen gas production.. 1st Symposium on Sunflower Industrial Uses
1999. Modelling and experimental study of catalytic combustion of methane on Pt.. 4th International Workshop on Catalytic Combustion
1992. Radiant heat transfer in natural gas central heating units. The Eurotherm Seminar 21 on Heat Transfer in Semi-Transparent Media
2003. Hydrogen production from vegetable oil by unmixed reforming. Seventh International Conference on Energy for a Clean Environment
2000. Sulphur poisoning and thermal cycling of precious metal methane combustion catalysts. The Royal Society of Chemistry Annual Conference 2000
2000. The effects of sulphur poisoning and thermal cycling on precious metal catalysed methane combustion. The 2nd Taylor Conference (Catalysis)
1996. The importance of prompt-NO formation and of NO reconversion in strained laminar binary rich partially premixed flames. International Symposium on Transport Phenomena in Combustion, 8th
1992. Modelling natural gas fired process heaters. 10th Members Conference, The International Flame Research Foundation on "The Future of Combustion Industry"
1992. An investigation of ultra-low NOx natural gas burners. The American Flame Research Committee, 1992 Fall International Symposium on Emissions Reduction and Energy Conservation: Recent Progress in Combustion Technology
1993. Prediction of Prompt-NOx in Hydrocarbon-Air flames. PEP 81st Symposium on Fuels and Combustion Technology for Advanced Aircraft Engines
1993. Experimental and theoretical model of a multi-jet natural gas burner. the Joint Meeting of the British and German Sections of the Combustion Institute
1991. The reduction of NOx formation in natural gas burner flames. The First International Conference on Combustion Technologies for a Clean Environment
2003. CH4, H2S, and SO2 oxidation on Pt catalysts. Seventh International Conference on Energy for a Clean Environment
2003. Mechanisms of CH4, H2S and SO2 oxidation on precious metal catalysts.. The European Combustion Meeting 2003 (ECM2003)
2001. High temperature catalytic combustion and its inhibition of gas phase ignition. 13th International Flame Research Foundation (IFRF) Members Conference, Noodwijkerhout, The Netherlands
2008. Methane oxidation over palladium-washcoated foils in the presence of sulphur dioxide. 7th International Workshop on Catalytic combustion 'Future concepts in energy related catalysts'
1997. Numerical Simulation of Multi-Dimensional Laminar Flames. Proceedings 10th International Conference on Numerical Methods in Laminar and Turbulent Flow
2000. Scalar Transport in Axisymmetric, Impinging Turbulent Jets. Proceedings 3rd International Symposium on Turbulence, Heat and Mass Transfer
2001. DPIV Measurements in Axisymmetric, Impinging Turbulent Jets. 4th International Symposium on Particle Image Velocimetry, Gottingen, Germany, September 2001
2003. Optical-Diagnostic Study of Two-Dimensional, Premixed Laminar Flames. Proceedings 1st International Conference on Optical and Laser Diagnostics
2004. Simulation of Two-Phase, Gas-Solid Turbulent Jets. European Symposium on Computer-Aided Process Engineering - 14
2005. Validation of a model of dilute two-phase, gas-solid turbulent flows. 15th European Symposium on Computer Aided Process Engineering (ESCAPE-15)
2003. Modelling of Underexpanded Jets Using Compressibility-Corrected, k-epsilon Turbulence Models. Proceedings 4th International Symposium on Turbulence, Heat and Mass Transfer
2007. The laminar burning properties of premixed methane-hydrogen flames determined using a novel analysis method.. The 3rd European Combustion Meeting (Chania, Greece) 2006
2003. Second-Order Conditional Moment Closure Modelling of H2/He Turbulent Jet Diffusion Flames. Proceedings 4th International Symposium on Turbulence, Heat and Mass Transfer
2003. First-Order Conditional Moment Closure Modelling of Turbulent Jet Diffusion Flames of Methane. 3rd International Symposium on Turbulence and Shear Flow Phenomena
2003. Conditional Moment Closure Modelling of Turbulent Hydrogen Diffusion Flames. Proceedings European Combustion Meeting, ECM2003
2005. Analysis of Kinetic Mechanism Performance in Conditional Moment Closure Modelling of Turbulent, Non-Premixed Methane Flames. Fourth International Symposium on Turbulence and Shear Flow Phenomena
2008. Large eddy simulation of particle dispersion in a straight, square duct flow. 18TH EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING
2012. The Venting of Hydrogen-Air Explosions in an Enclosure with L/D=2.8. IX ISHPMIE, International Symposium on Hazard, Prevention and Mitigation of Industrial Explosions
2003. The effect of copper on the cyclic oxidation of Ti-48Al-2Cr-2Nb. GAMMA TITANIUM ALUMINIDES 2003
2003. Oxidation resistance of Transient Liquid Phase (TLP)-bonded gamma titanium aluminide. TRENDS IN WELDING RESEARCH, PROCEEDINGS
2005. Venting of premixed gas explosions with a relief pipe of the same area as the vent. the European Combustion Meeting ECM2005, Belgium
2002. Supported precious metal catalysts for methane combustion in the presence of sulphur compounds. Catalyst Life Cycle – Preparation, Activation, Deactivation and Regeneration
2003. Wide, highly oriented mesophase pitch-based carbon tapes and their laminates. The International Carbon Conference 2003
1997. A study of the high temperature behavior of graphite. SPACE TECHNOLOGY AND APPLICATIONS INTERNATIONAL FORUM, PTS 1-3
1998. Precipitation of twinned L1(2) type Ni3Al from B2 type beta NiAl. ROLL OF CHARACTERIZATION IN UNDERSTANDING ENVIRONMENTAL DEGRADATION OF MATERIALS
2003. Transient liquid phase bonding of intermetallic compounds. THERMEC'2003, PTS 1-5
1997. Phase transformations during transient liquid phase bonding of NiAl. MICROSCOPY AND MICROANALYSIS
1995. Effects of entrained dust in turbulent gas explosions. First International Seminar on Fire and Explosion Hazard of Substances and Venting of Deflagrations
1998. Turbulent-Reynolds-number and turbulent-flame-quenching influences on explosion severity with implications for explosion scaling. Institution of Chemical Engineers Symposium Series
2000. Turbulent explosion scaling: an assessment of experimental data. , Third International Seminar on Fire and Explosion Hazards
2002. Resolution of pollutant concentrations using a fully 3D adaptive model. Atmospheric Modeling
2009. DNS and LES predictions of intermittency in a turbulent round jet. TURBULENCE, HEAT AND MASS TRANSFER 6
2003. Computational modelling of packed bed systems. 13th European Symposium on Computer Aided Process Engineering (ESCAPE-13)
2003. Computational modelling of packed bed systems. The 3rd World Congress on Industrial Process Tomography
1998. Transient liquid phase bonding of nickel aluminide to superalloys. ROLL OF CHARACTERIZATION IN UNDERSTANDING ENVIRONMENTAL DEGRADATION OF MATERIALS
1998. An extended coal combustion model. Coal Research Forum and the Coal Utilisation Subject Group of the IChemE
2012. Comparison of gaseous emissions for B100 and diesel fuels for real world urban and extra urban driving. SAE Technical Papers
2000. Activated carbon fibre supported transition metals for selective catalytic reduction of NO at low temperatures. The 2nd Taylor Conference (Catalysis)
1998. Studies of sulphur-nitrogen interactions in turbulent, spray flames. 12th Members Conference, International Flame Research Foundation (IFRF)
2011. The Role of Alternative Business Models in Socio-Technical Transitions; the Case of Energy Service Companies (ESCos) and the UK Energy System. 2nd International Conference on Sustainability Transitions
2009. Chemical manipulation of the minimum transport velocity
of fine particulate suspensions. Turbulence, Heat and Mass Transfer 6
2009. TURBULENCE MODULATION IN PIPE FLOWS OF DISPERSED AND
AGGREGATED COLLOIDAL SUSPENSIONS. Sixth International Symposium on Turbulence and Shear Flow Phenomena
2007. The effect of colloikal forces on the sedimentation and reslurrying characteristics of silica slurries.. The European Congress of Chemical Engineering (ECCE-6)
2006. Bridging the Gap: Slurry Behaviour from Coarse to Colloid. 5th World Congress on Particle Technology
2006. Applying the Quartz Crystal Microbalance Technique to Determine the Stability of Colloidal Suspensions. 5th World Congress on Particle Technology
2005. Application of a QCM-D to determine the stability of colloidal suspensions. Particulate Systems Analysis 2005, 21-23 September 2005, Stratford upon Avon
2010. The Influence of Traffic Conditions on Primary NO2 Tailpipe Emissions and Road-Side Pollutant Concentrations. 18th International Symposium Transport and Air Pollution (TAP)
1996. Optical-Diagnostic and Numerical Study of an Experimental Slot Burner. 1995 International Gas Research Conference
2002. Forecast of summer smog episodes using an adaptive grid model. Meterological Scientific Days 2002
2004. Photochemical air pollution formation in Central Europe. Proceedings of the 8th International Global Atmospheric Chemistry Conference
2004. The genotoxicity of size segregated urban particulate matter. Mutagenesis
2002. Free radical activity of urban particulate matter measured by plasmid strand break assay and the comet assay. United Kingdom Environmental Mutagen Society, (UKEMS), 25th Anniversary Conference
2004. DNA damage induced by size fractionated particulate components of urban air pollution. 95th Annual Meeting of the American Association for Cancer Research
2005. DNA damage and mutations induced by urban particulate matter. Proceedings of the Ninth Annual UK Review Meeting on Outdoor and Indoor Air Pollution
1997. Hot gas ammonia decomposition. Workshop on the removal of gasseous contaminants from hot fuel-gases
2004. Effective thermal conductivity of mineral oil based nanofluids. Particle Technology UK Forum
2005. A Dynamic Approach to the Dimension Reduction of Chemical Kinetic Schemes. European Symposium on Computer-Aided Process Engineering – 15, Computer-Aided Chemical Engineering – 20A
2012. Pulverised Biomass MEC Determination and Demonstration of High Reactivity. IX ISHPMIE, International Symposium on Hazard, Prevention and Mitigation of Industrial Explosions
2012. Minimum explosion concentration of biomass and torrefied biomass dusts. TORREFACTION OF BIOMASS WORKSHOP
2012. Explosibility of biomass and torrefied biomass powders: determination of minimum explosible concentrations. 20th European Biomass Conference and Exhibition
2007. The application of the QSSA via reaction lumping for the reduction of complex hydrocarbon mechanisms. Proceedings of the 1st International workshop on Model Reduction in Reactive Flows
2000. Experimental and modelling studies of sulphur and nitrogen doped premixed methane flames at low pressure. 28th International Symposium on Combustion
2011. Estimations of cost and CO2 emissions for smart grids using a linear programing approach. 2011 IEEE PES Trondheim PowerTech: The Power of Technology for a Sustainable Society, POWERTECH 2011
2007. A novel approach to predicting the behavior of arbitrary particulate mixtures under vibration. 17th European Symposium on Computer Aided Process Engineering - ESCAPE17
2010. Use of Xray microtomography for understanding structureproperty relationships. 6th World Congress in Industrial Process Tomography
1996. The use of carbons as models for coals and chars. UK National Meeting on Coal Research and its Applications
1996. Carbons as models for coals and chars. Carbon '96
2002. Sulphur poisoning and regeneration of precious metal catalysed methane combustion. Catalyst Life Cycle – Preparation, Activation, Deactivation and Regeneration
2005. The role of metals in biomass char combustion. ECM 2005, Louvain-la-Neuve
2002. Numerical simulation and modelling of combustion behaviour of coal blends.. 29th Combustion Institute Meeting
2006. Towards Biomass Classification for Energy Applications. Science in Thermal and Chemical Biomass Conversion
2002. Characterisation of biomass for energy applications. World Renewable Energy Congress VII
2003. Catalysis by potassium in the pyrolysis and combustion of biomass. Seventh International Conference on Energy for a Clean Environment
1997. An extended high temperature coal particle combustion model. 9th International Conference on Coal Science
1997. Advanced models for predicting carbon burn-out and NOx formation in coal combustion. American Flame Research Conference
1997. Advanced coal combustion modelling. 14th Annual International Pitsburgh Coal Conference and workshop
1997. An advanced coal model to predict NOx formation and carbon burn-out in pulverised coal flames. 14th Annual International Pittsburgh Coal Conference (Clean Coal Technology and Coal Utilization)
1998. The relationship of coal structure to char porosity. 2nd Annual Meeting on Coal Research and its Applications, Coal Research Forum & the Coal Utilisation Subject Group
1999. The relationshiip of coal structure to char porosity. ICCS'99, 10th International Conference on Coal Science
2000. The combustion of coal and biomass in a fixed bed furnace. 5th European Conference on Industrial Furnaces and Boilers
1997. Devolatilisation and combustion of Yugoslav lignites. The Fourth International Conference on Combustion for a Clean Environment
1999. Experimental and theoretical investigation into Yugoslavian coal gasification. Fifth International Conference on Combustion Technologies for a Clean Environment
1998. The prediction of coal char reactivity using coal rank related parameters. Coal Research Forum and the Coal Utilisation Subject Group of the IChemE
1998. Modelling of combustion processes - a review of present status and future needs. Fifteenth Annual International Pittsburgh Coal Conference
1997. Carbons as models for coal devolatilisation. 9th International Conference on Coal Science
2006. The role of metals in biomass pyrolysis, char formation and char properties. Science in Thermal and Chemical Biomass Conversion, Victoria, Canada
2001. The modelling of NO formation in the combustion of coal blends.. 11th International Conference on Coal Science, San Francisco
2012. Experimental Investigation of Vessel Volume and Equivalence Ratio in Vented Gas Explosions. World Academy of Science, Engineering and Technology
2009. Vented Explosions with a Vent Duct of Twice the Diameter of the Ventin a Vessel with an L/D of 2: Extremely Fast Turbulent Flames and HighOverpressures in the Vent Duct. ECM 2009 FOURTH EUROPEAN COMBUSTION MEETING
2011. Vented Gas Explosions in Small Vessels with an L/D of 2. 6th International Seminar on Fire and Explosion Hazards
2010. WCE 2010 - World Congress on Engineering 2010: Preface. WCE 2010 - World Congress on Engineering 2010
2006. Solid-State Diffusion Bonding of MA956 and PM2000. TRENDS IN WELDING RESEARCH, PROCEEDINGS
2006. Effect of Substrate Grain Size and Orientation on the Transient Liquid-Phase Bonding of Ferritic Oxide Dispersion Strengthened Alloys. TRENDS IN WELDING RESEARCH, PROCEEDINGS
2001. Co-combustion of coal and biomass in small heating appliances-emission of pollutants. 17th International Symposium on Combustion Processes, Poznan, Poland
2004. Influence of tyre origin on the yield and composition of products from the pyrolysis of scrap tyres. Used/Post Consumer Tyres
2003. Simulation of the formation and spread of photochemical air pollution in Hungary. Proceedings of the Conference on Modelling Fluid Flow (CMFF'03)
2003. Simulation of the effect of the plume of Budapest on photochemical air pollutant concentrations in Hungary. The Fourth International Urban Air Quality Conference
2002. Modelling photochemical air pollution in Hungary using an adaptive grid model. Air Pollution Modelling and Simulation
2002. Modelling tropospheric ozone formation in Hungary using an adaptive gridding method. Eurotrac 2002 Symposium
2008. Comparison of Particulate PAH Emissions for Diesel, Biodiesel and Cooking oil using a Heavy Duty DI Diesel Engine.
2009. Hydrogen-rich syngas from renewable fuels using oxygen and carbon dioxide transfer materials. Chemical-looping and Calcium-looping Processes for Carbon Capture, European Workshop
2010. Evaluation of Combustion and Emissions using Biodiesel and Blends with Kerosene in a Low NOx Gas Turbine Combustor. ASME Turbo Expo 2010: Power for Land, Sea, and Air
2007. Analysis of Driving Parameters and Emissions for Real World Urban Driving Cycles using an on-board Measurement Method for a EURO 2 SI car. 2007 International Fuels and Lubricants Conference, Kyoto, Japan
2009. Impact of Ambient Temperatures on VOC Emissions and OFP during Cold Start for SI Car Real World Urban Driving. SAE 2009 International Powertrains, Fuels and Lubricants Meeting
2008. Characterization of Regulated and Unregulated Cold Start Emissions for Different Real World Urban Driving Cycles using a SI Passenger Car. 2008 SAE International Powertrains, Fuels and Lubricants Congress
2008. Investigation of Regulated and Non-Regulated Cold Start Emissions using a EURO3 SI Car as a Probe Vehicle under Real World Urban Driving Conditions. SAE International Powertrains, Fuels and Lubricants Meeting
2009. Application of the FTIR Technique in the Hydrocarbon Speciation of Exhaust Gases for a Micro Gas Turbine Jet Engine. 19th International Symposium on Air Breathing Engines (ISABE)
2008. Reduction of Exhaust Emissions by a Synthetic Lubricating Oil with Higher Viscosity Grade and Optimized Additive Package for a Heavy Duty DI Diesel Engine Test. SAE International Powertrains, Fuels and Lubricants Meeting
2005. The synthesis of single-walled carbon nanotubes over an Al2O3/Fe2O3 binary aerogel catalyst. EMAG-NANO 2005: IMAGING, ANALYSIS AND FABRICATION ON THE NANOSCALE (IN JOURNAL OF PHYSICS CONFERENCE SERIES, 2006)
2003. A study of trace metal concentration of urban airborne particulate matter and its role in free radical activity as measured by plasmid strand break assay. Conférence de l'INRETS (Institut National de Recherche sur les Transports et leur sécurité ) :12e colloque international Transports et pollution de l'air
2003. A size segregated study of trace metal concentrations within urban particulate matter and their role in free radical activity. Proceedings of the Royal Meteorological Society Conference 2003
2006. Application of a non-hydrostatic meteorological model to flow and dispersion of tracers in a street canyon.
2000. The application of repro-modelling to a tropospheric chemical model. ENVIRONMENTAL MODELLING & SOFTWARE
1997. Oxidation resistant carbon-ceramic alloys, Part 1, Preliminary studies. Current UK Research in Carbon Science and Technology
2003. A radiative flamelet combustion model for turbulent, premixed methane-air flames. The 4th International Symposium on Turbulence, Heat and Mass Transfer
2001. An evaluation of non-adiabatic flamelet combustion models for burner applications. 2001 International Gas Research Conference
2001. Active carbon fibre supported nickel catalysts for low temperature selective reduction of NO. British Carbon Group Conference on Chemical & Physical Characterisation of Carbonaceous Materials
2000. Active carbon fibre supported transition metals for low temperature selective catalytic reduction of NO. EUROCARBON 2000
2001. Activated carbon fibre supported transition metals for low temperature selective catalytic reduction (SCR)of NO. Carbon 2001
2011. CO(2)PIPEHAZ: QUANTITATIVE HAZARD ASSESSMENT FOR NEXT GENERATION CO2 PIPELINES. HAZARDS XXII: PROCESS SAFETY AND ENVIRONMENTAL PROTECTION
2006. Investigation of Layer-Inversion and Mixing in Binary-Solid Liquid Fluidized Beds Using a Combined Continuum and Discrete Model. 5th World Congress on Particle Technology
2006. The Combined-Continuum-and-Discrete-Model (CCDM) for Simulation of Liquid-Particle Flows. 16th European Symposium on Computer Aided Process Engineering
2005. Simulation of Liquid Fluidisation Using a Combined Continuum and Discrete Model. 7th World Congress of Chemical Engineering
2009. An overview of methods of full-scale urban dispersion in experiments during DAPPLE.. Proceedings of the 8th Symposium on the Urban Environment, Annual AMS Meeting
2004. Information Support for the Network Analysis of Chemical Process Plant Definitions. European Symposium on Computer-Aided Process Engineering - 14
2007. Vented gas explosions in a cylindrical vessel with a vent duct. The European Combustion Institute Meeting, Chania, Greece
2008. Influence of static burst pressure and ignition position on duct-vented gas explosions. Fifth International Conference on fire and Explosion Hazards
2006. Self accelerating gas flames in large vented explosion volumes that are not accounted for in current vent design correlations. 2nd International Conference on Safety & Environment in Process Industry, Naples
1998. Detailed Measurements in an Idealized and a Practical Natural Gas Household Burner. Proceedings 1998 International Gas Research Conference
1998. Experimental studies of catalytic burners. Catalysts and the Environment
1997. Experimental and modelling studies of catalytic burners. Eurotherm seminar no. 54 on Compact Fired Heating Units
2012. The Acceleration of Flames in Tube Explosions with Two Obstacles as a Function of the Obstacle Separation Distance. IX ISHPMIE, International Symposium on Hazard, Prevention and Mitigation of Industrial Explosions
1998. A comparative study of sulphur poisoning and regeneration of precious metal group catalysts. 2nd Asia Pacific Conference on Sustainable Energy and Environmental Technology
1998. Poisoning and regeneration of precious metal group catalysts in the catalytic combustion of methane. The Twenty-seventh Symposium (International) on Combustion
1998. A comparative study of sulphur poisoning and regeneration of precious metal group catalysts.. Catalysts and the Environment
2013. Combined NEXAFS and XPS studies of a corrosion inhibitor: oleic acid adsorbed on mild steel surfaces. EUROCORR 2013 - European Corrosion Congress
1999. H2S Removal Using Spray-pyrolysed Calcium Acetate. 5th Int. Conference on Technologies for a clean Environment
1998. Experimental and kinetic studies on the effect of sulfur-nitrogen interactions on NO formation in flames. 27th International Symposium on Combustion
1996. Sulphur-Nitrogen interactions in flames and their effects on NO formation. 26th International Symposium on Combustion
2012. Influence of shape on particle behaviour in channel flow. Seventh International Symposium On Turbulence, Heat and Mass Transfer (THMT-12)
2007. An AMR solution method for the transported PDF equaiton.. The 3rd European Combusion Meetin, Chania, Greece
1994. Transient liquid phase bonding of NiAl using Ni-Si-B interlayers. ADVANCED JOINING TECHNOLOGIES FOR NEW MATERIALS II, CONFERENCE PROCEEDINGS
2004. Microstructural development and relationship to mechanical properties in polycrystalline to single crystal nickel-base superalloy transient liquid phase (TLP) bonds. Joining of Advanced and Specialty Materials VI
2004. Hot-stage light microscopy studies of the wettability of nickel-base superalloys during transient liquid phase bonding. Joining of Advanced and Specialty Materials VI
2012. Comparison of FLACS simulations against large-scale vented gas explosion experiments in a twin compartment enclosure. IX ISHPMIE International Symposium on Hazard, Prevention and Mitigation of Industrial Explosions
1998. TOPDEC Project: New Tools and Methodologies for the Design of Natural Gas Domestic Burners and Boilers. Proceedings 1998 International Gas Research Conference
1992. Spherical explosions aggravated by obstacles. IChemE Symposium series no. 130
1994. Turbulent explosions: A study of the influence of the obstacle scale. Institution of Chemical Engineers Symposium Series
2009. Fire and explosion engineering – some challenging aspects. IFE Graduate Lecture
2010. Current challenges in fire and explosion
safety engineering and the role of Higher
Education. Fire Safety Engineering
2012. Pool fire toxic emissions. PU foam as a flame stopper.. ‘Large Atmospheric Storage Tank Fires (LASTFIRE)
1989. Fast flame speeds and rates of pressure rise in the initial period of gas explosions in cylindrical enclosures with large L/D. Joint Meeting of the British and French Sections of the Combustion Institute
1989. Flame propagation, rates of pressure rise and the influence of obstacles in gas explosions in vessels with large L/D ratios. UKELG 10th meeting, Explosions in Industry
1989. The acceleration of flame propagation in a tube by an obstacle. the Joint Meeting of the British and French Sections of the Combustion Institute
1991. The effect of obstacles on enclosed gas explosions. The Institute of Energy International Conference on Industrial Fire and Explosion Hazards
1991. Gas Explosions in linked vessels. 13th ICDERS: International Colloquia on the Dynamics of Explosions and Reactive Systems
1991. The prediction of obstacle induced turbulence factors. UKELG 12th meeting, Mitigation, Suppression and Prevention of Explosions
1992. Prediction of explosion relief requirements for long enclosures based on totally confined tests.. The UK Explosions Liaison Group (UKELG)
1993. Flame acceleration around a 90° sharp bend.. Proceedings of the Anglo-German Combustion Symposium 1993
1993. An empirical turbulent combustion model: the influence of length scale. UKELG 16th meeting, Explosion Models: Strengths and Limitations
1996. Some aspects of explosion research at Leeds. UKELG 19th meeting, Trends in Explosion Research
1996. Vented Gas Explosions in Long Vessels. UKELG 20th meeting, Vented Explosions
1997. Recent Results on Explosion Scaling: Stronger Dependence on Scale than Anticipated?. UKELG 22nd meeting, Explosion Mitigation
1999. Explosion development in pipeline systems and linked vessels. UKELG 25th meeting, Industrial Combustion Hazards Joint meeting with the Combustion Institute (British Section)
2011. Measurements of the effects of fire-fighting tactics on post-flashover compartment fire characteristics. Fire Related Research and Developments (RE11)
1993. Explostions in a tube with a 90° bend.. 13th International Colloquia on the Dynamics of Explosions and Reactive Systems (13th ICDERS)
2011. Flame speed measurements in dust explosions. 6th International Seminar on Fire and Explosion Hazards
2000. An investigation into "rate of rise" detection systems for dust explosion suppression. IChemE Symposium Series
2000. Enclosed pool fires in low ventilation enclosures: flame temperatures and global heat loss using gas analysis. Sixth International Symposium
2006. Automatic Generation of Reduced Reaction Mechanisms for Hydrocarbon Oxidation with Application to Autoignition Boundary Prediction for Explosion Hazards Mitigation. 16th European Symposium on Computer Aided Process Engineering
2007. Simulated autoignition temperature and oxidation of cyclohexane using a QSSA reduced mechanism. Proceedings of the Third European Combustion Meeting
2001. Modelling of NO formation in the combustion of coal blends. 11th International Conference on Coal Science
1998. Carbon-ceramic alloys. NATO, Antalya
2007. Assessment of LES snf RANS predictions of impinging flows.. The 5th International Symposium on Turbulence and Shear Flow Phenomena
2005. Catalytic oxidation of CH4, H2S and SO2 on platinum group metals washcoated onto steel foil. Fourth Mediterranean Combustion Symposium (Portugal)
2008. Chassis Dynamometer Evaluation of On-Board Exhaust Emission Measurement System Performance in SI Car under Transient Operating Conditions. 2008 SAE International Powertrains, Fuels and Lubricants Congress
2004. Production of hydrogen from sunflower oil.. ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY
2004. Production of Hydrogen from vegetable oil.. National Meeting of the American Chemical Society, Philadelphia, Aug. 2004
2004. Demonstration of unmixed steam reforming of vegetable oil. Science in Thermal and Chemical Biomass Conversion
2003. Development of unmixed reforming for production of hydrogen from vegetable oil.. The First European Hydrogen Energy Conference (EHEC 2003)
2001. The relationship between initial fuel devolatilisation behaviour and emission behaviour during the co-combustion of coal and biomass.. 11th International Conference on Coal Science, San Francisco
2004. Anti-tumor extracts isolated from shark tissue. MOLECULAR BIOLOGY OF THE CELL
2003. Soot morphology in laser pyrolysis. ROMOPTO 2003: SEVENTH CONFERENCE ON OPTICS, 2004
2012. Biomass nut dust explosions and flame propagation.. IX ISHPMIE, International Symposium on Hazard, Prevention and Mitigation of Industrial Explosions
2012. Combustion and explosion of biomass.
2012. Pulverised Biomass Explosions: Investigation of the Ultra Rich Mixtures that give Peak Reactivity.. IX International Symposium on Hazards, Prevention, and Mitigation of Industrial Explosions (ISHPMIE)
2012. Flame Propagation and Combustion Analysis of Biomass Dust Explosions. the International Conference on Engineering Sciences (ICES2012)
1997. Predicting the probing depth of total electron-yield X-ray absorption spectroscopy for samples of mixed elemental composition. ECASIA 97: 7TH EUROPEAN CONFERENCE ON APPLICATIONS OF SURFACE AND INTERFACE ANALYSIS
1997. Thermal dehydration of hydrous chromium hydroxide gel: In situ studies by total electron-yield XAS. JOURNAL DE PHYSIQUE IV
2012. Pulverised Biomass Explosions: Investigation of the Ultra Rich Mixtures that give Peak Reactivity. IX ISHPMIE, International Symposium on Hazard, Prevention and Mitigation of Industrial Explosions
2004. Anisotropic Reynolds Stress Invariants in an Urban Street Canyon. 10th European Turbulence Conference
1998. Scale-up of swirl-stabilised pulverised-coal burners in the thermal input range 2.5-50 MW. Joint Flame Days 1998, Control of Flames and Combustion Processes
2012. Reynolds number effect on particle-laden channel flows. Seventh International Symposium On Turbulence, Heat and Mass Transfer (THMT-12)
2008. Computational Fluid Dynamics prediction of noise from a cold turbulent propane jet.. ASME Turbo Expo 2008
2003. Reconfigurable batch processes: innovative design of the engineering side of chemical supply chains. Computer-Aided Chemical Engineering 15: 8th International Symposium on Process Systems Engineering
1998. Material characterization of thin-walled-tube aluminum alloys for controlled-atmosphere brazing (CAB) of heat exchangers. ROLL OF CHARACTERIZATION IN UNDERSTANDING ENVIRONMENTAL DEGRADATION OF MATERIALS
2004. Reactions between constituents of two molten nickel-base superalloys and ceramic materials. Joining of Advanced and Specialty Materials VI
2009. The influence of traffic congestion, synoptic and in-street winds on NO2 concentrations around a congested intersection: a measurement study. the 7th International Conference on Air Quality - Science and Application (Air Quality 2009)
2009. Line source tracer release experiments in central London (DAPPLE project). 8th Symposium on the Urban Environment, 89th American Meteorological Society Annual Meeting
2011. CFD Temperature calculations for spill plumes in atria for glazing applications. Sixth International Seminar on Fire and Explosion Hazards
1998. Development and reduction of mechanisms. First International Workshop on CHEMKIN and its Future in Combustion
2004. The Evaluation of Combustion Mechanisms Using Local and Global Sensitivity and Uncertainty Methods. 4th International Conference on Sensitivity Analysis, SAMO04
2007. Can combustion technologies reduce our impact on both the global climate and local air quality?. Proceedings of the Third European Combustion Meeting ECM2007
2007. The use of global methods in the evaluation of nonlinear chemical kinetic models. Proceedings of the Fifth International Conference on Sensitivity Analysis of Model Output, SAMO2007
1998. Predicting NOx/sulphur interactions in turbulent flames using repro modelling. Seventh International Conference on Numerical Combustion
2010. Complex Air Flows Around Urban Intersections: Challenges For Modellers. 13th International Conference on Harmonisation within Atmospheric Dispersion Modelling for Regulatory Purposes
2010. A Global Sensitivity Study Of Predicted NO2 Concentrations In
An Urban Street Canyon. 13th International Conference on Harmonisation within Atmospheric Dispersion Modelling for Regulatory Purposes
1995. Reduction of the number of variables in complex systems. Complex Systems in Natural and Economic Sciences, Workshop on Methods of non-equilibrium processes and thermodynamics in economics and environment
2005. Formulation of nanofluids and its application in natural convective heat transfer conditions. 6th World Conference on Experimental Heat Transfer, Fluid Mechanics, and Thermodynamics
2005. Experimental investigation of phase change heat transfer using nanofluids. 7th World Congress on Chemical Engineering
2000. Effects of heat and mass transfer on the Rayleigh-Taylor stability and its application in critical heat flux. HEAT TRANSFER SCIENCE AND TECHNOLOGY 2000
1998. Boron-containing carbon-ceramic alloys. NATO, Antalya
2001. Sulphur poisoning and thermal cycling effects in precious metal catalysed methane combustion. North American Catalysis Society Meeting 2001
2005. Medium scale duct vented explosions of stratified propane-air mixtures.. the European Combustion Meeting ECM2005 (Belgium)
2005. Ignition of stratified propane-air mixtures outside the normal flammability limits.. 19th International Symposium on Combustion Processes, Poland
2006. Stratified propane-air explosions of global concentration outside normal flammability limits. 2nd International Conference on Safety & Environment in Process Industry, Naples
2005. Explosions in a partially filled interconnected vessel using methane-air in the lean to stoichiometric range. the European Combustion Meeting ECM2005, Belgium
2007. Propane-air explosions in a partially filled interconnected vessel.. Fifth International Conference on Fire and Explosion Hazards, Edinburgh
2007. Comparison between simply vented and duct vented stratified propane explosions.. The European Combustion Institute Meeting, Chania, Crete
2005. Detonation of Hydrogen in a Partially Filled Interconnecting Vessel Following an Initial Period of Pressure Piling. 20th, International colloquium on the dynamics of explosions and reactive systems
2003. Carbon burnout of pulverised coal in power station furnaces. Seventh International Conference on Energy for a Clean Environment
1996. Models of coal devolatilisation and its implications for the environment. Meeting of the Environment Division of the Coal Research Forum
2001. Modelling biomass combustion.. The Second Mediterranean Combustion Symposium, Sharm El-Sheikh
1998. A comprehensive biomass combustion model. World Renewable Energy Congress V
1996. Chemical modelling and measurements of the catalytic combustion of CH4/air mixtures on platinum and palladium catalysts. Third International Workshop on Catalytic Combustion
1996. The chemistry and kinetics of formation of nitro-PAH's. 26th International Symposium on Combustion
1998. Nitrogen oxide sub-models. IFRF TOTeM12, Guernsey, Channel Islands
1999. Modelling the combustion of coal and biomass. Fifth International Conference on Combustion Technologies for a Clean Environment
2002. Some aspects of CFD modelling. The Canadian Combustion Institute 2002