Publications

Tribology

To search for phrases, use quotation marks: "climate change smith"
To search for combinations of words, separate them by "AND" or "+": climate + change + Smith
If you don't use either of the above, the search will run on ANY keyword.

2023

Bryant MG, Beadling AR, Oladukon A, Geringer J, Corne P. 2023. Biomedical devices. In: Fretting Wear and Fretting Fatigue.
Brittain R, Liskiewicz T, Morina A, Neville A, Yang L. 2023. Diamond-like carbon graphene nanoplatelet nanocomposites for lubricated environments. Carbon. 485-498 205
Gong Y, Wang Y, Ghanbarzadeh A, Wang C, Ishihara A, Tamura Y, Neville A, Morina A. 2023. Experimental and numerical study on wear characteristics of steel surfaces involving the tribochemistry of a fully formulated oil. Part II: Computational modelling. Tribology International. 177
He X, Smart P, Taufiqurrakhman M, Wang C, Bryant M. 2023. Stable oral lubrication enhancer obtained from thiolated polyethylene glycol and mucin. Friction. 617-634 11.4
Morina A, Dhakal N, Wang X, Espejo C, Emami N. 2023. Impact of processing defects on microstructure, surface quality, and tribological performance in 3D printed polymers. Journal of Materials Research and Technology.
Smart P, Bryant M. 2023. Protection of Dental Materials: Mucin Layer Growth Kinetics & Properties and Their Influence on Lubrication. Biotribology. 100232-100232 33-34
Soltanahmadi S, Bryant M, Sarkar A. 2023. Insights into the multiscale lubrication mechanism of edible phase change materials. ACS Applied Materials and Interfaces. 3699-3712 15.3

2022

Ghouri I, Barker R, Brooks P, Kosarieh S, Barton D. 2022. The Effects of Corrosion on Particle Emissions from a Grey Cast Iron Brake Disc. Brake Colloquium & Exhibition - 40th Annual
Taufiqurrakhman M, Neville A, Bryant M. 2022. Factors influencing the bio-tribo-corrosion and chemistry on cobalt alloys: A brief literature review. 6th International Symposium of Biomedical Engineering (ISBE) 2021
Al Sheikh Omar A, Salehi FM, Farooq U, Neville A, Morina A. 2022. Effect of Zinc Dialkyl Dithiophosphate Replenishment on Tribological Performance of Heavy-Duty Diesel Engine Oil. Tribology Letters. 70.1
Armitage JL, Ghanbarzadeh A, Bryant MG, Neville A. 2022. Investigating the Influence of Friction and Material Wear on Triboelectric Charge Transfer in Metal–Polymer Contacts. Tribology Letters. 70.2
Brittain K, Morina A, Yang L, Neville A. 2022. Impact of thermal cycles on tribological properties and oxidation of MoS2 coatings. Tribologie und Schmierungstechnik. 50-59 69.1
Dreva K, Morina A, Yang L, Neville A. 2022. The effect of temperature on water desorption and oxide formation in MoS2 coatings and its impact on tribological properties. Surface and Coatings Technology. 433
Esfahani EA, Bukuaghangin O, Banfield S, Vangölü Y, Yang L, Neville A, Hall R, Bryant M. 2022. Surface engineering of wrought and additive layer manufactured Ti-6Al-4V alloy for enhanced load bearing and bio-tribocorrosion applications. Surface and Coatings Technology. 442
Gong Y, Morina A, Wang C, Wang Y, Tamura Y, Ishihara A, Ghanbarzadeh A, Neville A. 2022. Experimental and numerical study on wear characteristics of steel surfaces involving the tribochemistry of a fully formulated oil. Part I: Experiments. Tribology International. 107888-107888 176
Jabbar A, Palacios-Marín AV, Ghanbarzadeh A, Yang D, Tausif M. 2022. Impact of conventional and modified ring-spun yarn structures on the generation and release of fragmented fibers (microfibers) during abrasive wear and laundering. Textile Research Journal.
Jami ES, Hammerschlag AR, Ip HF, Allegrini AG, Benyamin B, Border R, Diemer EW, Jiang C, Karhunen V, Lu Y, Lu Q, Mallard TT, Mishra PP, Nolte IM, Palviainen T, Peterson RE, Sallis HM, Shabalin AA, Tate AE, Thiering E, Vilor-Tejedor N, Wang C, Zhou A, Adkins DE, Alemany S, Ask H, Chen Q, Corley RP, Ehli EA, Evans LM, Havdahl A, Hagenbeek FA, Hakulinen C, Henders AK, Hottenga JJ, Korhonen T, Mamun A, Marrington S, Neumann A, Rimfeld K, Rivadeneira F, Silberg JL, van Beijsterveldt CE, Vuoksimaa E, Whipp AM, Tong X, Andreassen OA, Boomsma DI, Brown SA, Burt SA, Copeland W, Dick DM, Harden KP, Harris KM, Hartman CA, Heinrich J, Hewitt JK, Hopfer C, Hypponen E, Jarvelin M-R, Kaprio J, Keltikangas-Järvinen L, Klump KL, Krauter K, Kuja-Halkola R, Larsson H, Lehtimäki T, Lichtenstein P, Lundström S, Maes HH, Magnus P, Munafò MR, Najman JM, Njølstad PR, Oldehinkel AJ, Pennell CE, Plomin R, Reichborn-Kjennerud T, Reynolds C, Rose RJ, Smolen A, Snieder H, Stallings M, Standl M, Sunyer J, Tiemeier H, Wadsworth SJ, Wall TL, Whitehouse AJO, Williams GM, Ystrøm E, Nivard MG, Bartels M, Middeldorp CM. 2022. Genome-wide Association Meta-analysis of Childhood and Adolescent Internalizing Symptoms. Journal of the American Academy of Child & Adolescent Psychiatry. 934-945 61.7
Liu Q, Barker R, Wang C, Qian J, Neville A, Pessu F. 2022. The corrosion behaviour of stainless steels and Ni-based alloys in nitrate salts under thermal cycling conditions in concentrated solar power plants. Solar Energy. 169-185 232
Liu Q, Qian J, Barker R, Wang C, Neville A, Pessu F. 2022. Effect of thermal cycling on the corrosion behaviour of stainless steels and Ni-based alloys in molten salts under air and argon. Solar Energy. 248-257 238
Nadimi S, Angelidakis V, Otsubo M, Ghanbarzadeh A. 2022. How can the effect of particle surface roughness on the contact area be predicted?. Computers and Geotechnics. 104890-104890 150
Pessu FO, Saleem E, Espejo C, Neville A. 2022. Understanding the local pitting corrosion characteristics of carbon steel in CO2 corrosion environment using artificially machined pits. Results in Engineering. 16
Raske N, Soltanahmadi S, de Boer G, Bryant M, Hewson RW. 2022. Finite element investigations of the fluid-solid behaviour in a bio-inspired poroelastic bearing. Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 1531-1544 236.8
Rosas JM, Atkins DJ, Chau AL, Chen Y-T, Bae R, Cavanaugh MK, Espinosa Lima RI, Bordeos A, Bryant MG, Pitenis AA. 2022. In vitro models of soft tissue damage by implant-associated frictional shear stresses. Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology.
Skjöldebrand C, Tipper JL, Hatto P, Bryant M, Hall RM, Persson C. 2022. Current status and future potential of wear-resistant coatings and articulating surfaces for hip and knee implants. Materials Today Bio.
Song B, Hua Y, Zhou C, Li Y, Yang L, Song Z. 2022. Fabrication and anticorrosion behavior of a bi-phase TaNbHfZr/CoCrNi multilayer coating through magnetron sputtering. Corrosion Science. 196
Sun X, Luo Y, Wang J, Wang Q, Qiao J, Beadling A, Bryant M, Jin Z. 2022. Structure, tribological properties, and the growth mechanism of in-situ generated TiC in titanium cermet. Friction. 706-716 10.5
Thornley A, Wang Y, Wang C, Chen J, Huang H, Liu H, Neville A, Morina A. 2022. Optimizing the Mo concentration in low viscosity fully formulated oils. Tribology International. 107437-107437 168
Vaitkunaite G, Espejo C, Thiebaut B, Neville A, Morina A. 2022. Low friction tribofilm formation and distribution on an engine cylinder tested with MoDTC-containing low viscosity engine lubricants. Tribology International. 171
Wade A, Webster F, Beadling AR, Bryant MG. 2022. Importance of surgical assembly technique on the engagement of 12/14 modular tapers. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 158-168 236.2
Wang D, de Boer G, Ghanbarzadeh A. 2022. A Numerical Model for Investigating the Effect of Viscoelasticity on the Partial Slip Solution. Materials. 15.15
Wang D, de Boer G, Nadimi S, Neville A, Ghanbarzadeh A. 2022. A Fully Coupled Normal and Tangential Contact Model to Investigate the Effect of Surface Roughness on the Partial Slip of Dissimilar Elastic Materials. Tribology Letters. 70.4
Wang D, de Boer G, Neville A, Ghanbarzadeh A. 2022. A Review on Modelling of Viscoelastic Contact Problems. Lubricants. 10.12
Wang J, Han B, Wang C, Neville A, Morina A. 2022. Study on the effect of graphene/Fe3O4 film on friction and wear performance under water lubrication. Diamond and Related Materials. 130
Wang Y, Azam A, Wilson MCT, Neville A, Morina A. 2022. A comparative study for selecting and using simulation methods of Gaussian random surfaces. Tribology International. 107347-107347 166
Wu G, Li Y, Brittain R, Lu Z, Yang L. 2022. Understanding of fracture conditions and material response in a model TiN film/stainless steel substrate system – A cross-sectional scratch test study. Surface and Coatings Technology. 442
Xu D, Yu X, Sai Q, Wang S, Barton D, Fieldhouse J, Kosarieh S. 2022. Noise and vibration performance of automotive disk brakes with laser-machined M-shaped grooves. Proceedings of the Institution of Mechanical Engineers Part D: Journal of Automobile Engineering.
Xu N, Wang C, Yang L, Barimah EK, Jose G, Neville A, Morina A. 2022. Nano-scale coating wear measurement by introducing Raman-sensing underlayer. Journal of Materials Science and Technology. 285-294 96
Xu N, Wang C, Yang L, Jose G, Morina A. 2022. Probing the Tribochemical Impact on Wear Rate Dynamics of Hydrogenated Amorphous Carbon via Raman-Based Profilometry.. ACS Applied Materials and Interfaces. 2071-2081 14.1
Zhang H, Li A, Wu J, Sun B, Wang C, Yang D. 2022. Effectiveness of fibre placement in 3D printed open-hole composites under uniaxial tension. Composites Science and Technology. 220

2021

Ghanbarzadeh A, Neville A. 2021. Computational methods in tribocorrosion. In: Tribocorrosion Fundamentals, Methods, and Materials.
Gilkeson C, Kosarieh S, Sanuddin A, Brooks P, Barton D, Shrestha S. 2021. Preliminary Comparisons of Particulate Emissions Generated from Different Disc Brake Rotors. Eurobrake 2021
Limmer F, Barton D, Brooks P, Gilkeson C, Kosarieh S. 2021. Development of a Small-scale Test Bench for Investigating the Tribology and Emission Behaviour of Novel Brake Friction Couples. Eurobrake 2021
Al Sheikh Omar A, Motamen Salehi F, Farooq U, Morina A, Neville A. 2021. Chemical and physical assessment of engine oils degradation and additive depletion by soot. Tribology International. 160
Armitage JL, Ghanbarzadeh A, Wang C, Neville A. 2021. An investigation into the influence of tribological parameters on the operation of sliding triboelectric nanogenerators. Tribology International. 155
Bai M, Yang L, Li J, Luo L, Sun S, Inkson B. 2021. Mechanical and tribological properties of Si and W doped diamond like carbon (DLC) under dry reciprocating sliding conditions. Wear. 484-485
Barnes AL, Morina A, Andrew RE, Neville A. 2021. The Effect of Additive Chemical Structure on the Tribofilms Derived from Varying Molybdenum-Sulfur Chemistries. Tribology Letters. 69.4
Beadling AR, Bryant MG, Dowson D, Neville A. 2021. Adverse loading effects on tribocorrosive degradation of 28 mm metal-on-metal hip replacement bearings. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 2664-2674 235.12
Dangnan F, Espejo C, Liskiewicz T, Gester M, Neville A. 2021. Water barrier performance of additively manufactured polymers coated with diamond-like carbon films. Diamond and Related Materials. 119
Dorgham A, Azam A, Parsaeian P, Khan T, Sleiman M, Wang C, Morina A, Neville A. 2021. Understanding the effect of water on the transient decomposition of zinc dialkyldithiophosphate (ZDDP). Tribology International. 157
Dorgham A, Azam A, Parsaeian P, Wang C, Morina A, Neville A. 2021. Nanoscale viscosity of triboreactive interfaces. Nano Energy. 79
Dorgham A, Azam A, Parsaeian P, Wang C, Morina A, Neville A. 2021. An Assessment of the Effect of Relative Humidity on the Decomposition of the ZDDP Antiwear Additive. Tribology Letters. 69
Dorgham A, Parsaeian P, Azam A, Wang C, Ignatyev K, Mosselmans F, Morina A, Neville A. 2021. Tribochemistry evolution of DDP tribofilms over time using in-situ synchrotron XAS. Tribology International. 160
Ehret P, Ghanbarzadeh A. 2021. Duncan Dowson and elastohydrodynamic lubrication at Leeds University. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 2575-2581 235.12
Elam FM, Hsia F-C, van Vliet S, Bliem R, Yang L, Weber B, Franklin SE. 2021. The influence of corrosion on diamond-like carbon topography and friction at the nanoscale. Carbon. 590-599 179
ELTahry O, Salehi FM, Morina A, Ferrari L, Farooq U, Forsberg C, Neville A. 2021. Chemical Analysis of Deposits Separated from Blocked Fuel Filters. SAE International Journal of Fuels and Lubricants. 29-41 15.1
He X, Lou T, Cao P, Bai X, Yuan C, Wang C, Neville A. 2021. Experimental and molecular dynamics simulation study of chemically stable superhydrophobic surfaces. Surface and Coatings Technology. 418
He X, Lou T, Yang Z, Bai X, Yuan C, Wang C, Neville A. 2021. Lubricant-infused titania surfaces with high underwater transparency for antifouling applications: A combined experimental and molecular dynamics study. Applied Surface Science. 148848-148848 543
Khan T, Tamura Y, Yamamoto H, Morina A, Neville A. 2021. Investigation of the Tribological and Tribochemical Interactions of Different Ferrous Layers Applied to Nitride Surfaces. Journal of Tribology. 143.1
Liu Q, Qian J, Barker R, Wang C, Neville A, Pessu F. 2021. Application of Double Loop Electrochemical Potentio-kinetic Reactivation for characterizing the intergranular corrosion susceptibility of stainless steels and Ni-based alloys in solar nitrate salts used in CSP systems. Engineering Failure Analysis. 129
Soltanahmadi S, Raske N, de Boer GN, Neville A, Hewson RW, Bryant MG. 2021. Fabrication of Cartilage-Inspired Hydrogel/Entangled Polymer–Elastomer Structures Possessing Poro-Elastic Properties. ACS Applied Polymer Materials.
Taufiqurrakhman M, Neville A, Bryant MG. 2021. The Effect of Protein Structure and Concentration on Tribocorrosion and Film Formation on CoCrMo Alloys. Journal of Bio- and Tribo-Corrosion. 7.4
Thompson R, Austin D, Wang C, Neville A, Lin L. 2021. Low-frequency plasma activation of nylon 6. Applied Surface Science. 544
Toboła D, Liskiewicz T, Yang L, Khan T, Boroń Ł. 2021. Effect of mechanical and thermochemical tool steel substrate pre-treatment on diamond-like carbon (DLC) coating durability. Surface and Coatings Technology. 422
Wang D, De Boer G, Neville A, Ghanbarzadeh A. 2021. A new numerical model for investigating the effect of surface roughness on the stick and slip of contacting surfaces with identical materials. Tribology International. 159
Wang H, Xu X, Wang C, Neville A, Hua Y. 2021. Fundamental Insight into the Degradation Mechanism of an rGO-Fe3O4 Supercapacitor and Improving Its Capacity Behavior via Adding an Electrolyte Additive. Energy and Fuels. 8406-8416 35.9
Wang J, Han B, Wang C, Gong Y, Li Y, Neville A, Morina A. 2021. Failure analysis of the piston used in a pneumatic down the hole impactor. Engineering Failure Analysis. 127
Wang S, Yu X, Shen L, Yang A, Chen E, Fieldhouse J, Barton D, Kosarieh S. 2021. Noise reduction of automobile cooling fan based on bio-inspired design. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 465-478 235.2-3
Wang Y, Azam A, Wilson MCT, Neville A, Morina A. 2021. Generating fractal rough surfaces with the spectral representation method. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 2640-2653 235.12
Wang Y, Dorgham A, Liu Y, Wang C, Ghanbarzadeh A, Wilson MCT, Neville A, Azam A. 2021. Towards optimum additive performance: A numerical study to understand the influence of roughness parameters on the zinc dialkyldithiophosphates tribofilm growth. Lubrication Science. 1-14 33.1
Wang Y, Dorgham A, Liu Y, Wang C, Wilson MCT, Neville A, Azam A. 2021. An Assessment of Quantitative Predictions of Deterministic Mixed Lubrication Solvers. Journal of Tribology. 143.1
Xi Z, Yuan C, Bai X, Wang C, Neville A. 2021. Preparation of Degradable Superhydrophobic Mg/P/Z/F/H Composite Materials and Their Anticorrosion. Coatings. 1239-1239 11.10
Yang J, Yuan Y, Li K, Amann T, Wang C, Yuan C, Neville A. 2021. Ultralow friction of 5CB liquid crystal on steel surfaces using a 1,3-diketone additive. Wear. 203934-203934 480-481

2020

Barton D, Brooks P, Kosarieh S, Neville A, Paulus A, Limmer F. 2020. A comparison of methods for characterizing brake pad surfaces. Eurobrake 2020
Abbas RK, Ghanbarzadeh A, Hassanpour A. 2020. A novel method for estimating the real-time dullness of tri-cone oil drill bits. Engineering Failure Analysis. 109
Al-Amin M, Abdul Rani AM, Abdu Aliyu AA, Abdul Razak MA, Hastuty S, Bryant MG. 2020. Powder mixed-EDM for potential biomedical applications: A critical review. Materials and Manufacturing Processes. 1789-1811 35.16
Al-Amin M, Abdul Rani AM, Abdu Aliyu AA, Bryant MG, Danish M, Ahmad A. 2020. Bio-ceramic coatings adhesion and roughness of biomaterials through PM-EDM: a comprehensive review. Materials and Manufacturing Processes. 1157-1180 35.11
Al-Amin M, Abdul-Rani AM, Danish M, Thompson HM, Abdu Aliyu AA, Hastuty S, Zohura FT, Bryant MG, Rubaiee S, Rao TVVLN. 2020. Assessment of PM-EDM cycle factors influence on machining responses and surface properties of biomaterials: A comprehensive review. Precision Engineering. 531-549 66
Al-Jeboori Y, Kosarieh S, Ofune M, Neville A, Morina A. 2020. The effect of clearance between tappet insert and camlobe on the tribological and tribochemical performance of cam/follower surfaces. Tribology International. 149
Aliyu AA, Abdul-Rani AM, Rubaiee S, Danish M, Bryant M, Hastuty S, Razak MA, Ali S. 2020. Electro-Discharge Machining of Zr67Cu11Ni10Ti9Be3: An Investigation on Hydroxyapatite Deposition and Surface Roughness. Processes. 8.6
Andablo-Reyes E, Bryant M, Neville A, Hyde P, Sarkar R, Francis M, Sarkar A. 2020. 3D biomimetic tongue-emulating surfaces for tribological applications. ACS Applied Materials and Interfaces. 49371-49385 12.44
Azam A, Dorgham A, Khaemba DN, Salehi FM, See T, Neville A. 2020. Understanding the role of surface textures in improving the performance of boundary additives, part II: Numerical simulations. Tribology International. 152
Bryant M, Sin JR, Emami N, Neville A. 2020. Effect of proteins and phosphates on the degradation and repassivation of CoCrMo alloys under tribocorrosion conditions. Tribology - Materials, Surfaces & Interfaces. 207-218 14.4
Clark ER, Hemmings K, Greco S, Neville A, Porter KE, Bryant MG. 2020. Tribological Characteristics of Human Vascular Smooth Muscle Cells: The Implication of Disease State on Friction. Biotribology. 22
Dangnan F, Espejo C, Liskiewicz T, Gester M, Neville A. 2020. Friction and wear of additive manufactured polymers in dry contact. Journal of Manufacturing Processes. 238-247 59
de Boer GN, Raske N, Soltanahmadi S, Bryant MG, Hewson RW. 2020. Compliant-poroelastic lubrication in cartilage-on-cartilage line contacts. Tribology - Materials, Surfaces & Interfaces. 151-165 14.3
de Boer GN, Raske N, Soltanahmadi S, Dowson D, Bryant MG, Hewson RW. 2020. A porohyperelastic lubrication model for articular cartilage in the natural synovial joint. Tribology International. 149
Esfahani EA, Soltanahmadi S, Morina A, Han B, Nedelcu I, van Eijk MCP, Neville A. 2020. The multiple roles of a chemical tribofilm in hydrogen uptake from lubricated rubbing contacts. Tribology International. 146
Espejo C, Wang C, Thiébaut B, Charrin C, Neville A, Morina A. 2020. The role of MoDTC tribochemistry in engine tribology performance. A Raman microscopy investigation. Tribology International. 150
Ghanbarzadeh A, Faraji M, Neville A. 2020. Deterministic normal contact of rough surfaces with adhesion using a surface integral method. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. 476.2242
He X, Tian F, Bai X, Yuan C, Wang C, Neville A. 2020. Biomimetic lubricant-infused titania nanoparticle surfaces via layer-by-layer deposition to control biofouling. Applied Surface Science. 515
He X, Tian F, Chang J, Bai X, Yuan C, Wang C, Neville A. 2020. Haloperoxidase Mimicry by CeO2–x Nanorods of Different Aspect Ratios for Antibacterial Performance. ACS Sustainable Chemistry & Engineering. 6744-6752 8.17
Irwin NJ, Bryant MG, McCoy CP, Trotter JL, Turner J. 2020. Multifunctional, Low Friction, Antimicrobial Approach for Biomaterial Surface Enhancement. ACS Applied Bio Materials. 1385-1393 3.3
Khaemba DN, Azam A, See T, Neville A, Salehi FM. 2020. Understanding the role of surface textures in improving the performance of boundary additives, part I: Experimental. Tribology International. 146
Li K, Jiang J, Amann T, Yuan Y, Wang C, Yuan C, Neville A. 2020. Evaluation of 1,3-diketone as a novel friction modifier for lubricating oils. Wear. 452-453
Mancuso E, Downey C, Doxford-Hook E, Bryant MG, Culmer P. 2020. The use of polymeric meshes for Pelvic Organ Prolapse: current concepts, challenges and future perspectives. Journal of Biomedical Materials Research - Part B Applied Biomaterials. 771-789 108.3
Nadimi S, Ghanbarzadeh A, Hassanpour A, Neville A. 2020. A discussion on the capability of X-ray computed tomography for contact mechanics investigations (Feikai Zhang, Jianhua Liu, Xiaoyu Ding, Zhimeng Yang Tribology International 145 (2020) 106167). Tribology International. 151
Nadimi S, Ghanbarzadeh A, Neville A, Ghadiri M. 2020. Effect of particle roughness on the bulk deformation using coupled boundary element and discrete element methods. Computational Particle Mechanics. 603-613 7.3
Sanuddin AB, Kosarieh S, Gilkeson CA, Brooks PC, Barton DC. 2020. Airflow Simulation and Measurement of Brake Wear Particle Emissions with a Novel Test Rig. Jurnal Kejuruteraan. 95-101 3.1
Shi X, Liskiewicz TW, Beake BD, Chen J, Wang C. 2020. Tribological performance of graphite-like carbon films with varied thickness. Tribology International. 149
Smart P, Neville A, Bryant M. 2020. Tribocorrosion of dental tissues: The role of mucin. Tribology International. 148
Thornley B, Beadling R, Bryant M, Neville A. 2020. Investigation of the Repassivation Process of CoCrMo in Simulated Biological Fluids. CORROSION. 539-552 76.6
Vaitkunaite G, Espejo C, Wang C, Thiébaut B, Charrin C, Neville A, Morina A. 2020. MoS₂ tribofilm distribution from low viscosity lubricants and its effect on friction. Tribology International. 151
Wade A, Beadling AR, Neville A, De Villiers D, Cullum CJ, Collins S, Bryant MG. 2020. Geometric Variations of Modular Head-Stem Taper Junctions of Total Hip Replacements. Medical Engineering & Physics. 34-47 83
Wade A, Copley R, Alsheikh Omar A, Clarke B, Liskiewicz T, Bryant M. 2020. Novel numerical method for parameterising fretting contacts. Tribology International. 149
Wade A, Copley R, Clarke B, Alsheikh Omar A, Beadling AR, Liskiewicz T, Bryant MG. 2020. Real-time fretting loop regime transition identification using acoustic emissions. Tribology International. 145
Xu F, Liamas E, Bryant M, Adedeji AF, Andablo-Reyes E, Castronovo M, Ettelaie R, Charpentier TVJ, Sarkar A. 2020. A Self‐Assembled Binary Protein Model Explains High‐Performance Salivary Lubrication from Macro to Nanoscale. Advanced Materials Interfaces. 7.1
Xu S, Yang L, Liu Y-Z, Hua Y, Gao X, Neville A. 2020. Boosting hydrogen evolution performance by using a plasma-sputtered porous monolithic W2C@WC1−x/Mo film electrocatalyst. Journal of Materials Chemistry A. 19473-19483 8.37
Yang L, Laugel N, Housden J, Espitalier L, Matthews A, Yerokhin A. 2020. Plasma additive layer manufacture smoothing (PALMS) technology – An industrial prototype machine development and a comparative study on both additive manufactured and conventional machined AISI 316 stainless steel. Additive Manufacturing. 34
YAZDI R, GHASEMI HM, ABEDINI M, WANG C, NEVILLE A. 2020. Tribocorrosion behaviour of Ti6Al4V under various normal loads in phosphate buffered saline solution. Transactions of Nonferrous Metals Society of China. 1300-1314 30.5
Yue X, Zhang L, Sun C, Xu S, Wang C, Lu M, Neville A, Hua Y. 2020. A thermodynamic and kinetic study of the formation and evolution of corrosion product scales on 13Cr stainless steel in a geothermal environment. Corrosion Science. 169
Yue X, Zhang L, Wang Y, Xu S, Wang C, Lu M, Neville A, Hua Y. 2020. Evolution and characterization of the film formed on super 13Cr stainless steel in CO2-saturated formation water at high temperature. Corrosion Science. 163
Zhang H, Dickson AN, Sheng Y, McGrail T, Dowling DP, Wang C, Neville A, Yang D. 2020. Failure analysis of 3D printed woven composite plates with holes under tensile and shear loading. Composites Part B: Engineering. 107835-107835 186
Morina A; Liskiewicz T; Neville A Introduction to the 45th Leeds-Lyon Symposium on Tribology 2018 special issue “Smart Tribological Systems" , pp. 106377-106377

2019

Clark ER, Porter KE, Bryant MG. 2019. Exploring the fretting-corrosion mechanisms of NiTi in a simulated biological environment. International Conference on Shape Memory and Superelastic Technologies (SMST 2019)
Hua Y, Barker R, Wang C, Neville A. 2019. Comparison of corrosion products/scales on X65 carbon steel in a NaCl solution and a complex brine at different CO2 partial pressures. NACE 2019
Sanuddin A, Kosarieh S, Gilkeson C, Brooks P, Barton D. 2019. Design and assessment of a test rig for airborne brake wear debris measurements. EuroBrake 2019
Sanuddin AB, Kosarieh S, Gilkeson CA, Brooks PC, Barton DC. 2019. Measurement of brake wear particle emissions with a novel test rig. 5th International Conference on Recent Advances in Automotive Engineering ReCAR 2019
Thornley B, Bryant M, Neville A, Beadling R. 2019. Investigation Into the Repassivation Kinetics of CoCrMo for Applications in a Simulated Biological Environment. NACE International Corrosion Conference and Expo 2019
Al-Sallami W, Parsaeian P, Dorgham A, Neville A. 2019. Reactivity of oil‐soluble IL with silicon surface at elevated temperature. Lubrication Science. 151-162 31.4
Azam A, Dorgham A, Morina A, Neville A, Wilson MCT. 2019. A simple deterministic plastoelastohydrodynamic lubrication (PEHL) model in mixed lubrication. Tribology International. 520-529 131
Azam A, Dorgham A, Parsaeian P, Morina A, Neville A, Wilson MCT. 2019. The mutual interaction between tribochemistry and lubrication: Interfacial mechanics of tribofilm. Tribology International. 161-169 135
Azam A, Ghanbarzadeh A, Neville A, Morina A, Wilson M. 2019. Modelling tribochemistry in the mixed lubrication regime. Tribology International. 256-274 132
Barker R, Yazdi R, Hua Y, Jackson A, Ghanbarzadeh A, Huggan M, Charpentier T, Neville A. 2019. Development of an automated underwater abrasion rig to determine galvanic effects during the growth and localised breakdown of surface films in CO₂-containing solutions. Review of Scientific Instruments. 90.3
Cen H, Morina A, Neville A. 2019. Effect of ageing on lubricants’ physical and chemical properties and tribological performance: Part II: effect of water contamination on lubricant. Industrial Lubrication and Tribology. 48-53 71.1
Cen H, Morina A, Neville A. 2019. Effect of base oil polarity on the micropitting behaviour in rolling-sliding contacts. Lubrication Science. 113-126 31.4
Clark ER, Porter KE, Bryant MG. 2019. Fretting-corrosion of cardiovascular stent materials: The role of electrochemical polarisation on debris generation mechanisms. Biotribology. 18
Culmer P, Alazmani A, Bryant M, Mancuso E, King S, Mapunde V, Jeays-Ward K, Heron N, Pearson R, Vollebregt PF, Corner L, Day R. 2019. Continence technologies whitepaper: Informing new engineering science research. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 138-153 233.1
Dorgham A, Parsaeian P, Azam A, Wang C, Morina A, Neville A. 2019. Single-asperity study of the reaction kinetics of P-based triboreactive films. Tribology International. 288-296 133
Dorgham AK, Wang C, Morina A, Neville A. 2019. 3D tribo-nanoprinting using triboreactive materials. Nanotechnology. 30.9
Espejo C, Thiebaut B, Jarnias F, Wang C, Neville A, Morina A. 2019. MoDTC Tribochemistry in Steel/Steel and Steel/Diamond-Like-Carbon Systems Lubricated With Model Lubricants and Fully Formulated Engine Oils. Journal of Tribology. 141.1
Ghanbarzadeh A, Hassanpour A, Neville A. 2019. A numerical model for calculation of the restitution coefficient of elastic-perfectly plastic and adhesive bodies with rough surfaces. Powder Technology. 203-212 345
Ghanbarzadeh A, Motamen Salehi F, Bryant M, Neville A. 2019. Modelling the evolution of electrochemical current in potentiostatic condition using an asperity-scale model of tribocorrosion. Biotribology. 19-29 17
Ghanbarzadeh A, Motamen Salehi F, Bryant MG, Neville A. 2019. A New Asperity-Scale Mechanistic Model of Tribocorrosive Wear: Synergistic Effects of Mechanical Wear and Corrosion. Journal of Tribology. 141.2
Ghanbarzadeh A, Piras E, Wilson MCT, Morina A, Neville A. 2019. Numerical Study of the Effect of Tribofilm Kinetics and its Hardness on the Roughness Evolution of the Substrate in Boundary Lubrication Regime. Tribology Transactions. 747-759 62.5
Khan T, Tamura Y, Yamamoto H, Neville A, Morina A. 2019. Tribological response of MoS₂ coated and oxy-nitrided samples with alternative extreme pressure and anti-wear additives. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 1256-1273 233.8
Oladokun A, Hall RM, Neville A, Bryant MG. 2019. The evolution of subsurface micro-structure and tribo-chemical processes in cocrmo-ti6al4v fretting-corrosion contacts: What lies at and below the surface?. Wear. 440-441
Sarkar A, Andablo-Reyes E, Bryant M, Dowson D, Neville A. 2019. Lubrication of soft oral surfaces. Current Opinion in Colloid & Interface Science. 61-75 39
Soltanahmadi S, Charpentier T, Nedelcu I, Khetan V, Morina A, Freeman HM, Brown AP, Brydson R, van Eijk MCP, Neville A. 2019. Surface Fatigue Behaviour of a WC/aC:H Thin-Film and the Tribochemical Impact of Zinc Dialkyldithiophosphate. ACS Applied Materials & Interfaces. 41676-41687 11.44
Soltanahmadi S, Esfahani EA, Nedelcu I, Morina A, van Eijk MCP, Neville A. 2019. Surface Reaction Films from Amine-Based Organic Friction Modifiers and Their Influence on Surface Fatigue and Friction. Tribology Letters. 67
Taufiqurrakhman M, Bryant MG, Neville A. 2019. Tribofilms on CoCrMo alloys: Understanding the role of the lubricant. Biotribology. 19
Yazdi R, Ghasemi HM, Abedini M, Wang C, Neville A. 2019. Oxygen Diffusion Layer on Ti–6Al–4V Alloy: Scratch and Dry Wear Resistance. Tribology Letters. 67.4

2018

Al-Jeboori Y, Kosarieh S, Morina A, Neville A. 2018. Investigation of pure sliding and sliding/rolling contacts in a DLC/Cast iron system when lubricated in oils containing MoDTC-Type friction modifier. Tribology International. 23-37 122
Al-Jeboori Y, Kosarieh S, Ofune M, Morina A, Neville A. 2018. Measuring tappet rotation in a valvetrain rig when lubricated in a fully formulated oil containing MoDTC-type friction modifier. Tribology International. 442-449 121
Alnaqi AA, Kosarieh S, Barton DC, Brooks PC, Shrestha S. 2018. Material characterisation of lightweight disc brake rotors. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications. 555-565 232.7
Bingley R, Martin A, Manfredi O, Nejadhamzeeigilani M, Oladokun A, Beadling AR, Siddiqui S, Anderson J, Thompson J, Neville A, Bryant M. 2018. Fretting–corrosion at the modular tapers interface: Inspection of standard ASTM F1875-98. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 492-501 232.5
Bueno AHS, Solis J, Zhao H, Wang C, Simoes TA, Bryant M, Neville A. 2018. Tribocorrosion evaluation of hydrogenated and silicon DLC coatings on carbon steel for use in valves, pistons and pumps in oil and gas industry. Wear. 60-70 394–395
Cen H, Morina A, Neville A. 2018. Effect of lubricant ageing on lubricants' physical and chemical properties and tribological performance; Part I: effect of lubricant chemistry. Industrial Lubrication and Tribology. 385-392 70.2
Cen H, Morina A, Neville A. 2018. Effect of slide to roll ratio on the micropitting behaviour in rolling-sliding contacts lubricated with ZDDP-containing lubricants. Tribology International. 210-217 122
Dorgham A, Azam A, Morina A, Neville A. 2018. On the Transient Decomposition and Reaction Kinetics of Zinc Dialkyldithiophosphate. ACS Applied Materials and Interfaces. 44803-44814 10.51
Dorgham A, Parsaeian P, Neville A, Ignatyev K, Mosselmans F, Masuko M, Morina A. 2018. In situ synchrotron XAS study of the decomposition kinetics of ZDDP triboreactive interfaces. RSC Advances. 34168-34181 8.59
Khan T, Koide S, Tamura Y, Yamamoto H, Morina A, Neville A. 2018. Effects of Using Alternative Extreme Pressure (EP) and Anti-Wear (AW) Additives with Oxy-Nitrided Samples. Tribology Letters. 66.1
Lanigan JL, Fatima S, Charpentier TV, Neville A, Dowson D, Bryant M. 2018. Lubricious ionic polymer brush functionalised silicone elastomer surfaces. Biotribology. 1-9 16
Lutzler T, Charpentier TVJ, Barker R, Soltanahmadi S, Taleb W, Wang C, Alejo-Rodriguez A, Perre E, Schneider H, Neville A. 2018. Evaluation and Characterization of Anti-Corrosion Properties of Sol-Gel Coating in CO₂ Environments. Materials Chemistry and Physics. 272-277 216
Motamen Salehi F, Morina A, Neville A. 2018. Zinc Dialkyldithiophosphate Additive Adsorption on Carbon Black Particles. Tribology Letters. 66.3
Motamen Salehi F, Neville A, Bryant M. 2018. Bio-tribology of incontinence management products: additional complexities at the skin–pad interface. Tribology - Materials, Surfaces & Interfaces. 193-199 12.4
Onumata Y, Zhao H, Wang C, Morina A, Neville A. 2018. Interactive Effect between Organic Friction Modifiers and Additives on Friction at Metal Pushing V-Belt CVT Components. Tribology Transactions. 474-481 61.3
Vivar Mora L, Taylor A, Paul S, Dawson R, Wang C, Taleb W, Owen J, Neville A, Barker R. 2018. Impact of silica nanoparticles on the morphology and mechanical properties of sol-gel derived coatings. Surface and Coatings Technology. 48-56 342
Warren B, Hunt GJ, Bryant M, Neville A, Morina A, Gahagan M. 2018. Automatic transmission fluid corrosion inhibitor interactions with copper. Lubrication Science. 301-315 30.6
Xu D, Wang C, Espejo C, Wang J, Neville A, Morina A. 2018. Understanding the Friction Reduction Mechanism Based on Molybdenum Disulfide Tribofilm Formation and Removal. Langmuir. 13523-13533 34.45
Yazdi R, Ghasemi HM, Abedini M, Wang C, Neville A. 2018. Mechanism of tribofilm formation on Ti6Al4V oxygen diffusion layer in a simulated body fluid. Journal of the Mechanical Behavior of Biomedical Materials. 660-670 77

2017

Morina A, Neville A, Liskiewicz T. 2017. Introduction to the 43 rd Leeds-Lyon Symposium on Tribology 2016 special issue “Tribology (The Jost Report – 50 years on)”. 43rd Leeds-Lyon Symposium on Tribology
Oladokun AO, Bryant MB, Hall RH, Neville AN. 2017. The effect of cyclic load on the evolution of fretting current at the interface of Metal-on-Metal and Ceramic-on-Metal taper junction of hip prostheses. 29th Annual Congress of the International Society for Technology in Arthroplasty (ISTA 2016)
Abedi Esfahani E, Morina A, Han B, Nedelcu I, Van Eijk MCP, Neville A. 2017. Development of a novel in-situ technique for hydrogen uptake evaluation from a lubricated tribocontact. Tribology International. 433-442 113
Beadling AR, Bryant MG, Dowson D, Neville A. 2017. A Link Between the Tribology and Corrosive Degradation of Metal-on-Metal THRs. Tribology International. 354-361 113
Bryant M, Neville A. 2017. Fretting corrosion of CoCr alloy: Effect of load and displacement on the degradation mechanisms. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 114-126 231.2
Bryant MG. 2017. Soft tribology: current trends, concepts and techniques. Tribology - Materials, Surfaces and Interfaces. 179-179 11.4
Bryant MG, Buente D, Oladokun A, Ward M, Huber G, Morlock M, Neville A. 2017. Surface and subsurface changes as a result of tribocorrosion at the stem-neck interface of bi-modular prosthesis. Biotribology. 1-16 10
Buente D, Bryant M, Ward M, Neville A, Morlock M, Huber G. 2017. The taper corrosion pattern observed for one bi-modular stem design is related to geometry-determined taper mechanics. Medical Engineering & Physics. 79-88 46
de Boer G, Hewson R, Bryant M, Dowson D. 2017. An investigation into the contact between soft elastic and poroelastic bodies rotating under load. Tribology - Materials, Surfaces & Interfaces. 193-201 11.4
De Feo M, De Barros Bouchet MI, Minfray C, Esnouf C, Le Mogne T, Meunier F, Yang L, Thiebaut B, Pavan S, Martin JM. 2017. Formation of interfacial molybdenum carbide for DLC lubricated by MoDTC: Origin of wear mechanism. Wear. 17-28 370-371
Dorgham A, Neville A, Ignatyev K, Mosselmans F, Morina A. 2017. An in-situ synchrotron XAS methodology for surface analysis under high temperature, pressure and shear. Review of Scientific Instruments. 88.1
Khaemba DN, Jarnias F, Thiebaut B, Neville A, Morina A. 2017. The role of surface roughness and slide-roll ratio in the decomposition of MoDTC in tribological contacts. Journal of Physics D: Applied Physics. 50.8
Laguna L, Farrell G, Bryant M, Morina A, Sarkar A. 2017. Relating rheology and tribology of commercial dairy colloids to sensory perception. Food and Function. 563-573 8.2
Laguna L, Farrell G, Bryant M, Morina A, Sarkar A. 2017. Correction: Relating rheology and tribology of commercial dairy colloids to sensory perception. Food & Function. 888-888 2
Laguna L, Sarkar A, Bryant MG, Beadling AR, Bartolome B, Moreno-Arribas MV. 2017. Exploring mouthfeel in model wines: Sensory-to-instrumental approaches. Food Research International. 478-486 102
Lanigan J, Freeman HM, Wang C, Ward MB, Morina A, Neville A, Brydson R. 2017. Understanding the wear behaviour of non-doped and Si,O-doped diamond-like carbon films. RSC Advances. 43600-43610 7.69
Morina A, Neville A, Liskiewicz T. 2017. Introduction to the 43rd Leeds-Lyon Symposium on Tribology 2016 special issue ‘Tribology (The Jost Report – 50 years on)’. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 1103-1105 231.9
Motamen Salehi F, Morina A, Neville A. 2017. The effect of soot and diesel contamination on wear and friction of engine oil pump. Tribology International. 285-296 115
Pamies R, Espejo C, Carrión FJ, Morina A, Neville A, Bermúdez MD. 2017. Rheological behavior of multiwalled carbon nanotube-imidazolium tosylate ionic liquid dispersions. Journal of Rheology. 279-289 61.2
Parsaeian P, Ghanbarzadeh A, Van Eijk MCP, Nedelcu I, Morina A, Neville A. 2017. Study of the Interfacial Mechanism of ZDDP Tribofilm in Humid Environment and its Effect on Tribochemical Wear; Part II: Numerical. Tribology International. 33-38 107
Parsaeian P, Ghanbarzadeh A, Van Eijk MCP, Nedelcu I, Neville A, Morina A. 2017. A New Insight into the Interfacial Mechanisms Involved in the Formation of Tribofilm by Zinc Dialkyl Dithiophosphate. Applied Surface Science. 472-486 403
Parsaeian P, Van Eijk MCP, Nedelcu I, Neville A, Morina A. 2017. Study of the Interfacial Mechanism of ZDDP Tribofilm in Humid Environment and its Effect on Tribochemical Wear; Part I: Experimental. Tribology International. 135-143 107
Soltanahmadi S, Morina A, Eijk MCPV, Nedelcu I, Neville A. 2017. Experimental Observation of Zinc Dialkyl DithioPhosphate (ZDDP)-Induced Iron Sulphide Formation. Applied Surface Science. 41-51 414
Soltanahmadi S, Morina A, van Eijk MCP, Nedelcu I, Neville A. 2017. Tribochemical Study of Micropitting in Tribocorrosive Lubricated Contacts: The Influence of Water and Relative Humidity. Tribology International. 184-198 107
Wei X, Zhang P, Wei D, Zhao H, Wang C, Liskiewicz T. 2017. Fretting wear behaviour of double-glow plasma Cr–Nb coating on γ-TiAl alloy. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 1184-1191 231.9
Wei X, Zhang P, Wei D, Zhao H, Wang C, Liskiewicz TW. 2017. Mechanical and tribological properties of Cr-Nb double-glow plasma coatings deposited on TiAl alloy. Tribology - Materials, Surfaces & Interfaces. 98-106 11.2
Yazdi R, Ghasemi HM, Wang C, Neville A. 2017. Bio-corrosion behaviour of oxygen diffusion layer on Ti-6Al-4V during tribocorrosion. Corrosion Science. 23-32 128

2016 & previous

Arribas A, Bermúdez MD, Carrion F, Espejo C, Martínez-López E, Sanes J. 2012. Scratch resistance of modified polymethylmethacrylate nanocomposites. In: Materials and Surface Engineering: Research and Development.
Montellano López A, Khazravi M, Richardson R, Dehghani A, Roshan R, Liskiewicz T, Morina A, Jayne DG, Neville A. 2011. Locomotion selection and mechanical design for a mobile intra-abdominal adhesion-reliant robot for minimally invasive surgery. In: Towards Autonomous Robotic Systems. TAROS'11 Proceedings of the 12th Annual conference on Towards autonomous robotic systems.
Neville A, Morina A. 2004. Wear and chemistry of lubricants. In: Stachowiak GW (eds.) Wear, Materials, Mechanisms and Practice,. Tribology in Practice.
Barker R, Bryant M, Pessu F, Neville A. 2014. Determining the behavior of sulfur compounds in controlling preferential weld corrosion in CO2-saturated brine. Corrosion 2014
Beadling A, Bryant M, Dowson D, Neville A. 2015. The Effect of Microseparation on Corrosion Rates of Metal-on-Metal Total Hip Replacements. Corrosion 2015
Bryant M, Farrar R, Freeman R, Brumitt K, Neville A. 2013. The role of surface roughness on the initiation and propagation of fretting-corrosion of cemented femoral stems. 5th World Tribology Congress, WTC 2013
Burkinshaw M, Neville A, Morina A, Greenall A, Sutton M. 2013. The tribological characteristics of ZDDP, detergent and an organic antiwear additive when lubricating ferrous and aluminium-silicon surfaces. 5th World Tribology Congress, WTC 2013
Charpentier T, Milner P, Neville A, Hewson RW, Morina A. 2010. Development of novel bio-inspired antifreeze surfaces. Proceedings of the COST Strategic Workshop, Principles and Development of Bio-inspired Materials
Clark ER, Porter KE, Bryant MG. 2016. P33 In-stent restenosis: the potential role of tribocorrosion. BSCR Autumn Meeting 2016
Green JH, Morina A, Priest M, Neville A. 2004. Evolution of tribofilms under lubrication conditions experienced in engine valve trains. 30th Leeds-Lyon Symposium on Tribology
Green JH, Priest M, Morina A, Neville A. 2003. Approaches to sensitising engine valve train friction models to lubricant formulation characteristics. 29th Leeds-Lyon Symposium on Tribology
Green JH, Priest M, Morina A, Neville A. 2005. An engine cylinder head and tribometer study of lubricant chemistry effects on tribological performance and the consequences for valve train models - B-39.
Haque T, Morina A, Neville A. 2008. Tribochemical interactions between lubricant additives and low hydrogen containing DLC coating under boundary lubrication conditions. ASME/STLE International Joint Tribology Conference
Hesketh J, Beadling A, Dowson D, Neville A. 2013. The influence of continuous and intermittent sliding on the release of ions from cobalt chromium surfaces. 5th World Tribology Congress, WTC 2013
Hu XM, Alzawai K, Gnanavelu A, Neville A, Wang C, Crossland A, Martin J. 2011. Assessing the effect of corrosion inhibitor on erosion-corrosion of API-5L-X65 in multi-phase jet impingement conditions. WEAR
Ivonye I, Neville A, Wang C. 2015. The corrosion of carbon steel in the presence of Monoethylene Glycol (MEG) - Assessing the influence of an iron carbonate scale. Nace International Corrosion 2015 Conference and Expo
Kosarieh S, Morina A, Flemming J, Lainé E, Neville A. 2013. Tribological performance of DLC/cast iron and steel/cast iron system when lubricated in fully formulated oils with different concentration of MoDTC-type friction modifier.. 5th World Tribology Congress, WTC 2013
Lee PM, Morina A, Priest M, Neville A. 2008. Comparison of tribochemical processes on TE-77 ring on linear and 'in engine' fired ring on liner samples. STLE Annual Conference and Exhibition, Cleveland, OH, US. 18-22 May 2008
Liskiewicz T, Morina A, Neville A. 2008. Friction in nature. 4th International Conference on Comparing Design in Nature with Science and Engineering
Mistry K, Morina A, Neville A, Webster M. 2006. Advanced Tribo-materials for Gears. International Conference on Industrial Tribology
Mitchell K, Cayre OJ, Morina A, Neville A, Walker G, Sutton M. 2013. Microencapsulation for next generation lubricants. 5th World Tribology Congress, WTC 2013
Montellano López A, Khazravi M, Richardson R, Dehghani A, Roshan R, Liskiewicz T, Morina A, Jayne DG, Neville A. 2011. Locomotion Selection and Mechanical Design for a Mobile Intra-abdominal Adhesion-reliant Robot for Minimally Invasive Surgery. 12th Conference Towards Autonomous Robotic Systems (TAROS 2011)
Morina A, Green JH, Neville A, Priest M. 2005. ZDDP and MoDTC interactions and their effect on tribological performance - Tribofilm characteristics and its evolution - Abstract A-05.
Morina A, Hewson R, Neville A, Liskiewicz TW, Yan Y. 2008. Cartilage Inspired Lubrication Mechanism. Biological Approaches for Engineering
Morina A, Liskiewicz T, Neville A. 2006. Designing new lubricant additives using biomimetics. 3rd International Conference on Design and Nature
Morina A, Neville A, Green JH, Priest M. 2003. Assessing friction, wear and film formation characteristics in formulated lubricants in severe to moderate boundary lubrication conditions. 29th Leeds-Lyon Symposium on Tribology
Morina A, Neville A, Green JH, Priest M. 2005. Additive/additive interactions in boundary lubrication - A study of film formation and tenacity. Tribology and Interface Engineering Series
Morina A, Zhao H, Mosselmans F. 2013. In-situ surface chemistry of lubricant films using X-ray absorption near edge spectroscopy. 5th World Tribology Congress, WTC 2013
Neville A, Haque T, Morina A. 2008. Tribochemical interactions of moly dimer and zddp additives with crn coating and bearing steel while sliding against cast iron in boundary lubrication conditions. PROCEEDINGS OF THE ASME/STLE INTERNATIONAL JOINT TRIBOLOGY CONFERENCE, PTS A AND B
Neville A, Wang C, Ramachandran S, Jovancicevic V. 2003. Erosion-Corrosion Mitigation Using Chemicals. CORROSION 2003, NACE, San Diego, USA
Ofune M, Yang L, Morina A, Neville A. 2015. DLC coatings for cam follower applications: The role of the surface on tribochemical reactions, friction and wear. Malaysian International Tribology Conference 2015 (MITC2015)
Oladokun AO, Pettersson M, Bryant M, Hall R, Neville A. 2016. Sub-surface investigation of fretted CO28CR6MO and TI6AL4V. The International Society for Technology in Arthroplasty (ISTA), 28th Annual Congress, 2015
Rai Y, Neville A, Morina A. 2013. In-situ interface chemical characterization of a boundary lubricated contact. 5th World Tribology Congress, WTC 2013
Wang C, Neville A, Ramachandran S. 2004. Understanding the action of inhibitors in mitigating erosion-corrosion in impinging flows. CORROSION/04, NACE
Yang L, Neville A, Brown A, Ransom P, Morina A. 2013. Spectroscopic study of boundary lubricated W-DLC coatings. 5th World Tribology Congress, WTC 2013
Zhao H, Lanigan J, Morina A, Neville A, Polcar T, Cavaleiro A, Meunier F. 2014. Effect of organic lubricant additives on the tribological performance and triboflim formation in diamond-like-carbon coatings. 5th World Tribology Congress
Akbar A, Hu X, Neville A, Wang C. 2011. The influence of flow rate and inhibitor on the protective layer under erosion-corrosion conditions using rotating cylinder electrode. NACE - International Corrosion Conference Series.
Akbar A, Hu X, Neville A, Wang C. 2011. Flow Rate and Inhibitor Influences on Protective Scale Formed on Carbon Steel. MATERIALS PERFORMANCE. 54-59 50.12
Aribo S, Bryant M, Hu X, Neville A. 2013. Erosion-corrosion of lean duplex stainless steel (uns s32101) in a co2-saturated oilfield brine. NACE - International Corrosion Conference Series.
Beadling AR, Bryant M, Dowson D, Neville A. 2016. Tribocorrosion of hard-on-hard total hip replacements with metal and ceramic counterfaces under standard and adverse loading conditions. Tribology International. 359-367 103
Bermúdez MD, Carrión FJ, Espejo C, Martínez-López E, Sanes J. 2011. Abrasive wear under multiscratching of polystyrene+single-walled carbon nanotube nanocomposites. Effect of sliding direction and modification by ionic liquid. Applied Surface Science. 9073-9081 257.21
Bryant M, Culmer P. 2016. Surfaces and interfaces in bioengineering systems. Surface Topography: Metrology and Properties. 4.4
Bryant M, Farrar R, Brummitt K, Freeman R, Neville A. 2013. Fretting corrosion of fully cemented polished collarless tapered stems: the influence of PMMA bone cement. Wear. 290-299 301.1-2
Bryant M, Farrar R, Freeman R, Brummitt K, Neville A. 2013. Fretting corrosion characteristics of polished collarless tapered stems in a simulated biological environment. Tribology International. 105-112 65
Bryant M, Farrar R, Freeman R, Brummitt K, Neville A. 2016. The role of surface pre-treatment on the microstructure, corrosion and fretting corrosion of cemented femoral stems. Biotribology. 1-15 5
Bryant M, Farrar R, Freeman R, Brummitt K, Nolan J, Neville A. 2014. Galvanically enhanced fretting-crevice corrosion of cemented femoral stems. Journal of the Mechanical Behavior of Biomedical Materials. 275-286 40
Bryant M, Hu X, Farrar R, Brummitt K, Freeman R, Neville A. 2013. Crevice corrosion of biomedical alloys: A novel method of assessing the effects of bone cement and its chemistry. Journal of Biomedical Materials Research - Part B Applied Biomaterials. 792-803 101 B.5
Bryant M, Neville A. 2016. Corrosion and mechanical properties. Orthopaedics and Trauma. 176-191 30.3
Bryant M, Ward M, Farrar R, Freeman R, Brummitt K, Nolan J, Neville A. 2013. Failure analysis of cemented metal-on-metal total hip replacements from a single centre cohort. Wear. 226-233 301.1-2
Bryant M, Ward M, Farrar R, Freeman R, Brummitt K, Nolan J, Neville A. 2014. Characterisation of the surface topography, tomography and chemistry of fretting corrosion product found on retrieved polished femoral stems. Journal of the Mechanical Behavior of Biomedical Materials. 321-334 32
Burkinshaw M, Neville A, Morina A, Sutton M. 2012. Calcium sulphonate and its interactions with ZDDP on both aluminium-silicon and model silicon surfaces. Tribology International. 41-51 46.1
Burkinshaw M, Neville A, Morina A, Sutton M. 2012. Calcium sulfonate and its interactions with ZDDP on both aluminium-silicon and model silicon surfaces. Tribology International. 289+ 46
Burkinshaw M, Neville A, Morina A, Sutton M. 2012. Lubrication of aluminium-silicon surfaces with ZDDP and detergents. Tribology - Materials, Surfaces and Interfaces. 53-58 6.2
Burkinshaw M, Neville A, Morina A, Sutton M. 2013. The lubrication of both aluminium-silicon and model silicon surfaces with calcium sulphonate and an organic antiwear additive. Tribology International. 211-216 67
Burkinshaw M, Neville A, Morina A, Sutton M. 2014. ZDDP and its interactions with an organic antiwear additive on both aluminium-silicon and model silicon surfaces. Tribology International. 102-109 69
Carrión FJ, Espejo C, Sanes J, Bermúdez MD. 2010. Single-walled carbon nanotubes modified by ionic liquid as antiwear additives of thermoplastics. Composites Science and Technology. 2160-2167 70.15
Cen H, Morina A, Neville A, Pasaribu R, Nedelcu I. 2012. Effect of water on ZDDP anti-wear performance and related tribochemistry in lubricated steel/steel pure sliding contacts. Tribology International. 47-57 56
Charpentier TVJ, Neville A, Baudin S, Smith MJ, Euvrard M, Bell A, Wang C, Barker R. 2015. Liquid infused porous surfaces for mineral fouling mitigation. Journal of Colloid and Interface Science. 81-86 444
Charpentier TVJ, Neville A, Hewson RW, Morina A, Millner P. 2012. Development of anti-icing materials by chemical tailoring of hydrophobic textured metallic surfaces. Journal of Colloid and Interface Science.
Charpentier TVJ, Neville A, Millner P, Hewson R, Morina A. 2013. An Investigation of Freezing of Supercooled Water on Anti-Freeze Protein Modified Surfaces. Journal of Bionic Engineering. 139-147 10.2
De Feo M, De Barros Bouchet MI, Minfray C, Le Mogne T, Meunier F, Yang L, Thiebaut B, Martin JM. 2016. MoDTC lubrication of DLC-involving contacts. Impact of MoDTC degradation. Wear. 116-125 348-349
Dong-ya X, Zhen S, Zhuo Z, Liu-quan Y, Quan-hong Y. 2009. Preparation of a SWCNT-DNA modified electrode and its electrochemical detection property. NEW CARBON MATERIALS. 183-186 24.2
Espejo C, Arribas A, Monzó F, Díez PP. 2012. Nanocomposite films with enhanced radiometric properties for greenhouse covering applications. Journal of Plastic Film & Sheeting. 336-350 28.4
Espejo C, Carrión F-J, Martínez D, Bermúdez M-D. 2013. Multi-walled Carbon Nanotube-Imidazolium Tosylate Ionic Liquid Lubricant. Tribology Letters. 127-136 50.2
Espejo C, Carrión FJ, Bermúdez MD. 2013. Scratch Resistance of New Polystyrene Nanocomposites with Ionic Liquid-Modified Multi-walled Carbon Nanotubes. Tribology Letters. 271-285 52.2
Espejo C, Carrión-Vilches FJ, Bermúdez MD. 2014. Viscoelastic properties and long-term stability of polystyrene-carbon nanotube nanocomposites. Effect of the nature of the carbon nanotubes and modification by ionic liquid. Polymer Degradation and Stability. 42-48 103
Ghanbarzadeh A, Parsaeian P, Morina A, Wilson MCT, Van Eijk MCP, Nedelcu I, Dowson D, Neville A. 2016. A Semi-deterministic Wear Model Considering the Effect of Zinc Dialkyl Dithiophosphate Tribofilm. Tribology Letters. 61.1
Ghanbarzadeh A, Piras E, Nedelcu I, Brizmer V, Wilson MCT, Morina A, Dowson D, Neville A. 2016. Zinc dialkyl dithiophosphate antiwear tribofilm and its effect on the topography evolution of surfaces: A numerical and experimental study. Wear. 186-198 362-363
Ghanbarzadeh A, Wilson M, Morina A, Dowson D, Neville A. 2016. Development of a new mechano-chemical model in boundary lubrication. Tribology International. 573-582 93.Part B
Ghanbarzadeh A, Wilson M, Morina A, Neville A. 2016. A new strategy for the relative movement of rough surfaces in contact using a boundary element method. European Journal of Computational Mechanics. 309-328 25.4
Greenall A, Neville A, Morina A, Sutton M. 2012. Investigation of the interactions between an ovel, organic anti-wear additive, ZDDP and overbased calcium sulphonate. Tribology International. 52-61 46.1
Greenall A, Neville A, Morina A, Sutton M. 2012. Investigation of the interactions between a novel,organicanti-wear additive,ZDDP and overbased calcium sulfonate. Tribology International. 289+ 46
Hague T, Morina A, Neville A. 2010. Influence of friction modifier and antiwear additives on the tribological performance of a non-hydrogenated DLC coating. SURF COAT TECH. 4001-4011 204.24
Haque T, Morina A, Neville A. 2010. Effect of Friction Modifiers and Antiwear Additives on the Tribological Performance of a Hydrogenated DLC Coating. J TRIBOL-T ASME. 132.3
Haque T, Morina A, Neville A. 2011. Tribological performance evaluation of a hydrogenated diamond-like carbon coating in sliding/rolling contact - effect of lubricant additives. P I MECH ENG J-J ENG. 393-405 225.J6
Haque T, Morina A, Neville A, Arrowsmith S. 2008. Tribochemical interactions of friction modifier and antiwear additives with CrN coating under boundary lubrication conditions. J TRIBOL-T ASME. 130.4
Haque T, Morina A, Neville A, Kaladia R, Arrowsmith S. 2008. Study of the ZDDP antiwear tribofilm formed on the DLC coating using AFM and XPS techniques. AM SOC TEST MATER. 92-102 1501
Haque T, Morina A, Neville A, Kapadia R, Arrowsmith S. 2007. Non-ferrous coating/lubricant interactions in tribological contacts: Assessment of tribofilms. TRIBOLOGY INTERNATIONAL. 1603-1612 40.10-12
Haque T, Morina A, Neville A, Kapadia R, Arrowsmith S. 2009. Effect of oil additives on the durability of hydrogenated DLC coating under boundary lubrication conditions. WEAR. 147-157 266.1-2
Hu R, Hewson R, Morina A, Liu Z. 2014. Influence of material properties and operating conditions on the predicted performance of poroelastic faced bearings. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY. 131-139 228.2
Ivonye I, Wang C, Hu X, Neville A. 2013. Corrosion study of carbon steel in the presence of monoethylene glycol (MEG) and corrosion inhibitors in acid. NACE - International Corrosion Conference Series.
Jimenez AE, Morina A, Neville A, Bermudez MD. 2009. Surface interactions and tribochemistry in boundary lubrication of hypereutectic aluminium-silicon alloys. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY. 593-601 223.J3
Khaemba DN, Neville A, Morina A. 2015. A methodology for Raman characterisation of MoDTC tribofilms and its application in investigating the influence of surface chemistry on friction performance of MoDTC lubricants. Tribology Letters. 59.3
Khaemba DN, Neville A, Morina A. 2016. New insights on the decomposition mechanism of Molybdenum DialkyldiThioCarbamate (MoDTC): a Raman spectroscopic study. RSC Advances. 38637-38646 6.45
Khan T, Tamura Y, Yamamoto H, Morina A, Neville A. 2016. Friction and wear mechanisms in boundary lubricated oxy-nitrided treated samples. Wear. 101-115 368-369
Korach C, Stempfle P, Mischler S, Yan Y, Neville A, Najjar D, Torrance AA, Bigerelle M, Migaud H, Iost A, Wang L, Ito K, Martin JM, Minfray C, Kato K, Roper GW, Morina A, Green JH, Priest M, Coy R, Booth JE, Nelson K, Harvey TJ, Wood RJK, Yamaguchi ES, Harrison JJ, Powrie HEG, Maillat M, Liu Y, Gubisch M, Haensel T, Scherge M, Spiess L, Schaefer JA, Fontaine J, Erdemir A, Haque T, Yamamoto K, Matsukato K, Higgs F, Stachowiak GW, Podsiadlo P, Soom A, Fox M, Tamminen J, Sandstrom CE, Andersson P, Herbst H, Coy RC, Gallardo-Hernandez AE, Lewis R, Dwyer-Joyce RS, Poll G, Evans HP, Liu S, Hild W, Luo J, Kano M, Yasuda Y, Martins RC, Amaro RI, Seabra JO, Ciulli E, Lubrecht T, Hohn BR, Michaelis K, Kreil O, Vergne P, Krupka I, Hard M, Liska M, Campos A, Sottomayor A, Mourier L, Mazuyer D, Lubrecht AA, Donnet C. 2006. Special issue: Interactions of Tribology and the Operating Environment: Proceedings of the 32nd Leeds-Lyon Symposium on Tribology (Lyon, 2005) - Discussion. TRIBOL INT. I-VII 39.12
Kosarieh S, Morina A, Flemming J, Laine E, Neville A. 2016. Wear Mechanisms of Hydrogenated DLC in Oils Containing MoDTC. Tribology Letters. 64
Kosarieh S, Morina A, Lainé E, Flemming J, Neville A. 2013. The effect of MoDTC-type friction modifier on the wear performance of a hydrogenated DLC coating. Wear. 890-898 302.1-2
Kosarieh S, Morina A, Neville A, Lainé E, Flemming J. 2012. Tribological performance and tribochemical processes in a DLC/steel system when lubricated in a fully formulated oil and base oil. Surface and Coatings Technology.
Lanigan J, Zhao H, Morina A, Neville A. 2014. Tribochemistry of silicon and oxygen doped, hydrogenated Diamond-like Carbon in fully-formulated oil against low additive oil. Tribology International.
Lanigan JL, Wang C, Morina A, Neville A. 2016. Repressing oxidative wear within Si doped DLCs. Tribology International. 651-659 93.B
Lee PM, Morina A, Priest M, Neville A. 2009. Comparison of the tribofilms formed on piston ring and cylinder samples in a fired engine and a reciprocating tribometer. World Tribology Congress 2009 - Proceedings. 296+
Liskiewicz G, Kula P, Neville A, Pietrasik R, Morina A, Liskiewicz T. 2013. Hydrogen influence on material interaction with ZDDP and MoDTC lubricant additives. Wear. 966-971 297.1-2
Liskiewicz TW, Morina A, Neville A. 2008. Challenges in lubricant additives technology. The Triz Journal. pp.2+ 2
Liu-quan Y, Dong-ya X, Quan-hong Y, Zhuo Z. 2008. Microstructure and electrochemical properties of single-walled carbon nanotube-DNA hybrids. NEW CARBON MATERIALS. 7-11 23.1
Lopez AM, Khazravi M, Richardson R, Dehghani A, Roshan R, Liskiewicz T, Morina A, Neville A, Jayne DG. 2012. FORCE CHARACTERISATION OF ONE AXIS FOR AN ADHESIVE FOOT IN A CLIMBING ROBOT FOR MINIMALLY INVASIVE ABDOMINAL SURGERY. FIELD ROBOTICS. 705-714
Mistry K, Morina A, Neville A. 2010. Tribo-Chemistry of Lubricated DLC Coatings for Engineering Components under Extreme-Pressure Contact Conditions. TRIBOL LUBR TECHNOL. 16-17 66.5
Mistry K, Morina A, Neville A. 2012. Single cam tribometer for evaluating tribological parameters and tribochemistry of DLC coated valve train follower. Tribology - Materials, Surfaces and Interfaces. 31-37 6.1
Mistry KK, Haque T, Morina A, Yablon DG, Neville A, Webster MN. 2009. Characterisation of the tribofilm on a WC-DLC coating under sliding-rolling contact conditions. Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2009. 626+
Mistry KK, Morina A, Erdemir A, Neville A. 2013. Tribological performance of EP lubricants with phosphorus-based additives. Tribology Transactions. 645-651 56.4
Mistry KK, Morina A, Erdemir A, Neville A. 2013. Extreme pressure lubricant additives interacting on the surface of steel- and tungsten carbide-doped diamond-like carbon. Tribology Transactions. 623-629 56.4
Mistry KK, Morina A, Neville A. 2011. A tribochemical evaluation of a WC-DLC coating in EP lubrication conditions. WEAR. 1739-1744 271.9-10
Mistry KK, Neville A, Morina A, Webster MN. 2008. Lubricant/surface interactions under extreme pressure conditions: corrosion inhibitor interacting extreme pressure/anti-wear additives on steel surface. P I MECH ENG J-J ENG. 315-323 222.J3
Morina A. 2012. Enablig and emerging lubrication technologies. Tribology - Materials, Surfaces and Interfaces. 93+ 6.3
Morina A, Green JH, Neville A, Priest M. 2003. Surface and tribological characteristics of tribofilms formed in the boundary lubrication regime with application to internal combustion engines. Tribology Letters. 443-452 15.4
Morina A, Haque T, Neville A. 2007. MoDTC low friction tribofilm durability - Effect of interactions with ZDDP and their dependence on substrate material. Society of Tribologists and Lubrication Engineers - 62nd Annual Meeting of the Society of Tribologists and Lubrication Engineers 2007. 1044-1046 2
Morina A, Haque T, Neville A. 2009. Tribochemistry of lubricant additives on next-generation surface coatings. World Tribology Congress 2009 - Proceedings. 27+
Morina A, Lee PM, Priest M, Neville A. 2011. Challenges of simulating 'fired engine' ringliner oil additive/surface interactions in ringliner bench tribometer. Tribology - Materials, Surfaces and Interfaces. 25-33 5.1
Morina A, Liskiewicz T, Yan Y, Neville A. 2007. Opportunities and challenges for obtaining effective lubricated engineering systems inspired by the lubrication of synovial joints. COMP BIOCHEM PHYS A. S135-S135 146.4
Morina A, Neville A. 2007. Tribofilms: aspects of formation, stability and removal. J PHYS D APPL PHYS. 5476-5487 40.18
Morina A, Neville A. 2007. Understanding the composition and low friction tribofilm formation/removal in boundary lubrication. TRIBOL INT. 1696-1704 40.10-12
Morina A, Neville A, Priest M, Green JH. 2006. ZDDP and MoDTC interactions and their effect on tribological performance - tribofilm characteristics and its evolution. TRIBOL LETT. 243-256 24.3
Morina A, Neville A, Priest M, Green JH. 2006. ZDDP and MoDTC interactions in boundary lubrication - The effect of temperature and ZDDP/MoDTC ratio. TRIBOL INT. 1545-1557 39.12
Morina A, Xia X, Neville A, Priest M, Roshan R, Warrens CP, Payne MJ. 2011. Role of friction modifiers on the tribological performance of hypereutectic Al-Si alloy lubricated in boundary conditions. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 369-378 225.6
Morina A, Xia X, Neville A, Priest M, Roshan R, Warrens CP, Payne MJ. 2011. Role of friction modifiers on the tribological performance of hypereutectic Al-Si alloy lubricated in boundary conditions. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 552+ 225.6
Morina A, Zhao H, Mosselmans JFW. 2014. In-situ reflection-XANES study of ZDDP and MoDTC lubricant films formed on steel and diamond like carbon (DLC) surfaces. Applied Surface Science.
Motamen Salehi F, Khaemba DN, Morina A, Neville A. 2016. Corrosive-Abrasive Wear Induced by Soot in Boundary Lubrication Regime. Tribology Letters. 63
Neville A, Haque T, Morina A. 2008. Friction and its importance in fuel economy - probing the nanoscale characteristics of surfaces in order to understand lubricant/surface interactions. J PHYS-CONDENS MAT. 20.35
Neville A, Hesketh J, Beadling AR, Bryant MG, Dowson D. 2016. Incorporating corrosion measurement in hip wear simulators: An added complication or a necessity?. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 406-420 230.5
Neville A, Morina A, Haque T, Voong Q. 2007. Compatibility between tribological surfaces and lubricant additives - How friction and wear reduction can be controlled by surface/lube synergies. TRIBOL INT. 1680-1695 40.10-12
Neville A, Morina A, Liskiewicz T, Yan Y. 2007. Synovial joint lubrication - does nature teach more effective engineering lubrication strategies?. P I MECH ENG C-J MEC. 1223-1230 221.10
Neville A, Morina A, Liskiewicz TW. 2007. Biomimetics and Tribology - Can We Learn From Nature for More Effective Lubrication Strategies. Proceedings of the Institution of Mechanical Engineers. Part C: Mechanical Engineering Science. 1223-1230 221.C10
Neville A, Wang C. 2008. Study of the effect of inhibitor on erosion-corrosion in CO 2-saturated condition with sand. Society of Petroleum Engineers - 4th International Conference on Oilfield Corrosion 2008 - "Extending Field Life: Mid-Life Crisis or Life Support". 29-42
Neville A, Wang C. 2009. Study of the effect of inhibitor on erosion-corrosion in CO2 - Saturated condition with sand. SPE Projects, Facilities and Construction. 4.1
Neville A, Wang C. 2009. Erosion-corrosion mitigation by corrosion inhibitors-An assessment of mechanisms. WEAR. 195-203 267.1-4
Neville A, Wang C. 2009. Erosion-corrosion of engineering steels-Can it be managed by use of chemicals?. WEAR. 2018-2026 267.11
Ofune M, Banks P, Morina A, Neville A. 2016. Development of valve train rig for assessment of cam/follower tribochemistry.. Tribology International. 733-744 93.B
Oladokun AO, Pettersson MP, Bryant MB, Engqvist HE, Persson CP, Hall RH, Neville AN. 2015. Fretting of CoCrMo and Ti6Al4V Alloys in Modular Prostheses. Tribology - Materials, Surfaces & Interfaces. 165-173 9.4
Parsaeian P, Ghanbarzadeh A, Wilson M, Van Eijk MCP, Nedelcu I, Dowson D, Neville A, Morina A. 2016. An experimental and analytical study of the effect of water and its tribochemistry on the tribocorrosive wear of boundary lubricated systems with ZDDP-containing oil. Wear. 23-31 358-359
Pettersson M, Bryant MG, Schmidt S, Engvist H, Hall RM, Neville A, Persson C. 2016. Dissolution behaviour of silicon nitride coatings for joint replacements. Materials Science and Engineering: C. 497-505 62
Priest M, Morina A. 2016. Introduction to the 41st Leeds-Lyon Symposium on Tribology, held at Leeds Trinity University in Leeds (UK), September 2014. Tribology International. 483-485 93.B
Rai Y, Neville A, Morina A. 2016. Transient processes of MoS₂ tribofilm formation under boundary lubrication. Lubrication Science. 449-471 28.7
Roshan R, Jayne DG, Liskiewicz T, Taylor GW, Gaskell PH, Chen L, Montellano-Lopez A, Morina A, Neville A. 2011. Effect of tribological factors on wet adhesion of a microstructured surface to peritoneal tissue.. Acta Biomater. 4007-4017 7.11
Roshan R, Priest M, Neville A, Morina A, Xia X, Green JH, Warrens CP, Payne MJ. 2008. Friction modelling of tribofilm performance in a bench tribometer for automotive engine lubricants. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY. 357-367 222.J3
Roshan R, Priest M, Neville A, Morina A, Xia X, Green JH, Warrens CP, Payne MJ. 2009. Friction modelling in an engine valve train considering the sensitivity to lubricant formulation. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY. 413-424 223.J3
Roshan R, Priest M, Neville A, Morina A, Xia X, Warrens CP, Payne MJ. 2011. Subscale tribofilm tribological modelling in boundary lubrication using multivariate analysis. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 58-71 225.2
Roshan R, Priest M, Neville A, Morina A, Xia X, Warrens CP, Payne MJ. 2011. A Boundary Lubrication Friction Model Sensitive to Detailed Engine Oil Formulation in an Automotive Cam/Follower Interface. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME. 133.4
Simoes TA, Bryant MG, Brown AP, Milne SJ, Ryan M, Neville A, Brydson R. 2016. Evidence for the dissolution of molybdenum during tribocorrosion of CoCrMo hip implants in the presence of serum protein. Acta Biomaterialia. 410-418 45
Solis J, Zhao H, Wang C, Verduzco JA, Bueno AS, Neville A. 2016. Tribological performance of an H-DLC coating prepared by PECVD. Applied Surface Science. 222-232 383
Soltanahmadi S, Morina A, Van Eijk MCP, Nedelcu I, Neville A. 2016. Investigation of the Effect of a Diamine-Based Friction Modifier on Micropitting and the Properties of Tribofilms in Rolling-Sliding Contacts. Journal of Physics D: Applied Physics. 49.50
Tamura Y, Zhao H, Wang C, Morina A, Neville A. 2016. Interaction of DLC and B4C coatings with fully formulated oils in boundary lubrication conditions. TRIBOLOGY INTERNATIONAL. 666-680 93
Taylor GW, Liskiewicz TW, Morina A, Neville A, Gaskell P, Jayne D. 2008. Investigation of adhesion forces at the peritoneal surface. DESIGN AND NATURE IV: COMPARING DESIGN IN NATURE WITH SCIENCE AND ENGINEERING Brebbia CA (eds.). 273-280 114
Taylor GW, Neville A, Jayne DG, Roshan R, Liskiewicz T, Morina A, Gaskell PH. 2010. Wet adhesion for a miniature mobile intra-abdominal device based on biomimetic principles. P I MECH ENG C-J MEC. 1473-1485 224.C7
Wang C, Neville A. 2006. Inhibitor performance on corrosion and erosion-corrosion under turbulent flow with sand and CO2 - An AC impedence study. Proceedings of Oilfield Corrosion Symposium.
Wang C, Neville A, Ramachandran S. 2004. Understanding inhibitor action on components of erosion, corrosion and their interactions in CO-containing slurries. Proceedings - First International Oilfield Corrosion Symposium; Managing Corrosion in Oil and Gas Production: Fluids, Chemicals, Materials, and More. 1-9
Wang C, Neville A, Ramachandran S, Jovancicevic V. 2005. Alleviation of erosion-corrosion damage by liquid-sand impact through use of chemicals. Wear. 649-658 258.1-4
Xia X, Morina A, Neville A, Priest M, Roshan R, Warrens CP, Payne MJ. 2008. Tribological performance of an Al-Si alloy lubricated in the boundary regime with zinc dialkyldithiophosphate and molybdenum dithiocarbamate additives. P I MECH ENG J-J ENG. 305-314 222.J3
Xiang D, Su Z, Zhao Z, Yang L, Yang Q. 2009. Preparation of a SWCNT-DNA modified electrode and its electrochemical detection property. New Carbon Materials. 24.02
Yang L, Neville A, Brown A, Ransom P, Morina A. 2013. Effect of temperature on tribological performances of WDLC coatings in model oils. Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2013. 141-143
Yang L, Neville A, Brown A, Ransom P, Morina A. 2014. Friction reduction mechanisms in boundary lubricated W-doped DLC coatings. Tribology International. 26-33 70
Yang L, Neville A, Brown A, Ransom P, Morina A. 2015. Effect of Lubricant Additives on the WDLC Coating Structure When Tested in Boundary Lubrication Regime. Tribology Letters. 1-12 57.14
Yang L, Xiang D, Yang Q, Zhao Z. 2008. Microstructure and electrochemical properties of single-walled carbon nanotube-DNA hybrids. New Carbon Materials. 7-11 23.01
Zhao H, Morina A, Neville A, Vickerman R. 2012. Anti-shudder properties of ATFs-investigation into tribofilm composition on clutch friction material and steel surfaces and the link to frictional performance. Tribology Transactions. 782-797 55.6
Zhao H, Morina A, Neville A, Vickerman R. 2013. Tribochemistry on clutch friction material lubricated by automatic transmission fluids and the link to frictional performance. Journal of Tribology. 135.4
Zhao H, Neville A, Morina A, Durham J, Vickerman R. 2008. A new method to evaluate the overall anti-shudder property of automatic transmission fluids - multiple parameters spider chart evaluation. P I MECH ENG J-J ENG. 459-469 222.J3
Zhao H, Neville A, Morina A, Vickerman R, Durham J. 2012. Improved anti-shudder performance of ATFs-Influence of a new friction modifier and surface chemistry. TRIBOLOGY INTERNATIONAL. 62-72 46.1
Zhao HY, Morina A, Neville A, Durham J, Vickerman R. 2010. Anti-Shudder Properties of ATFs-An Investigation into Friction Modifying Mechanisms Using VSFT and SAE No. 2 Tests. TRIBOL T. 816-830 53.6
Zhao HY, Morina A, Neville A, Durham J, Vickerman R. 2011. Understanding Friction Behavior in Automatic Transmission Fluid LVFA Test: A New Positive Curve Parameter to Friction Coefficient Ratio Index Evaluation. J TRIBOL-T ASME. 133.2
Zhao W, Wang C, Zhang T, Yang M, Han B, Neville A. 2016. Effects of laser surface melting on erosion-corrosion of X65 steel in liquid-solid jet impingement conditions. Wear. 39-52 362-363

No publications to show.