(Full time) 2021 start
Aeronautical and Aerospace Engineering MEng, BEng
Overview
Aeronautical and aerospace engineering is among the most challenging engineering disciplines, integrating mathematics, physics, materials and computer science with a strong design philosophy. This course will equip you to design, analyse, manufacture and operate aircraft and aerospace vehicles.
You’ll be taught by academics with a passion for aeronautical and aerospace engineering who are at the forefront of their fields. Their strengths and expertise include aircraft structural analysis (ensuring the aircraft is strong enough), structural optimisation (making best use of materials), aerodynamics and computational fluid dynamics (minimising drag and increasing fuel economy), and aerospace systems design and analysis (ensuring stability and control).
Our active Industrial Advisory Board helps inform the development of this course to ensure that it is up to date with industry developments and requirements. This is one of the reasons why our graduates are so in demand from industry.
You can choose to take either the four-year Integrated Masters (MEng, BEng) or the three-year Bachelor’s (BEng) degree on this course.
Find out more about the MEng, BEng and BEng.
Specialist facilities
You’ll benefit from our extensive lab space and equipment for subjects including: solid mechanics, fluid mechanics, engine testing and thermofluids as well as control and dynamics. You will have access to wind tunnels and a flight simulator which is housed in an adjacent school in addition to our high-spec CAD cluster and workshop facilities including various rapid prototyping systems.
We offer dedicated LabView facilities and training, which combines face-to-face teaching with hands-on lab exercises, which will build your skills in using the visual programming software LabVIEW, created by National Instruments.
Accreditation
Institution of Mechanical Engineers
This course is accredited by the Institution of Mechanical Engineers (IMechE) under licence from the UK regulator, the Engineering Council.
Accreditation is the assurance that a university course meets the quality standards established by the profession for which it prepares its students. An accredited mechanical engineering course must meet the quality standards set by the IMechE.
The MEng, BEng course is accredited as fully satisfying the educational base for a Chartered Engineer (CEng). Once you have graduated with your MEng degree, you will usually be required to have a minimum of three years industrial experience before you can apply for your chartered status.
The BEng is accredited as partially satisfying the educational base for CEng status. A course of accredited further learning will be required to complete the educational base for CEng.
Royal Aeronautical Society
This course is accredited by the Royal Aeronautical Society (RAeS) under licence from the UK regulator, the Engineering Council.
Accreditation is the assurance that a university course meets the quality standards established by the profession for which it prepares its students. An accredited aeronautical and aerospace engineering course must meet the quality standards set by the RAeS.
The MEng, BEng course is accredited as fully satisfying the educational base for a Chartered Engineer (CEng). Once you have graduated with your MEng degree, you will usually be required to have a minimum of three years industrial experience before you can apply for your chartered status.
The BEng is accredited as partially satisfying the educational base for CEng status. A course of accredited further learning will be required to complete the educational base for CEng.
Course content
Watching this video in China? View this video on Youku.
The first two years of our degree courses share the same set of compulsory modules, giving you the flexibility to switch between our different degrees. In Years 3 and 4 you’ll take modules in your chosen specialism.
In Years 1 and 2, you’ll study compulsory modules to establish the core mechanical engineering principles required by all branches of mechanical engineering. You’ll also undertake the first year design and manufacture project. Since many mechanical engineers go on to positions where they have management responsibilities, you’ll develop your knowledge of business practices by studying economics and management, taught by the Leeds University Business School.
Specialist aeronautical and aerospace modules form the basis of Year 3. You’ll learn to apply design to different aspects of modern aerospace vehicles, leading to detailed design of different aerospace vehicle systems. You’ll understand the fundamental principles of flight mechanics, stability and control, orbital mechanics and space flight, aerodynamics and propulsion systems, finite element analysis and aerospace vehicle design.
To experience some of these aspects in practice, you’ll also attend a flight course where you’ll be a passenger in a small aircraft, taking measurements of its performance during a range of manoeuvres.
If you take the MEng course, you’ll continue into Year 4 to learn more about analysing structures unique to the aerospace industry. You will be trained to conduct Computational Fluid Dynamics (CFD) simulations to analyse the aerodynamic characteristics of aerospace vehicles and will develop a deeper understanding of aerospace systems. There will be a choice of an optional module, allowing you to focus on the scientific principles of design optimization or rotary wing aircraft.
In addition to the taught modules, year 4 consists of an aerospace-related group project, usually in conjunction with leading aerospace companies that are members of the aerospace Industrial Advisory Board.
Projects
Every year of the course gives you hands-on experience of project work. As part of the Design and Manufacture modules in years 1 and 2, you will design, construct and test a model glider and a fully-automated Martian rover. These and other project activities give you the opportunity to explore your subject further as well as developing valuable skills in problem solving, communication and teamwork.
Find out more about our Projects.
Engineering ethics
You’ll study engineering ethics as part of your course, with lectures and/or seminars in each year of your study. Visit our engineering ethics webpage to find out more.
Course structure
The list shown below represents typical modules/components studied and may change from time to time. Read more in our terms and conditions.
Learning and teaching
You’ll benefit from our integrated style of learning and teaching. Laboratory classes, project work, and industry sponsored fieldwork allow you to gain hands-on experience investigating and applying material from your lectures and tutorials to real life work situations. We also organise industrial visits and offer additional seminars delivered by practising engineers and other professionals. Our close links with industry also mean that you will have direct contact with industry and potential employers from an early stage in your course.
You will have a designated personal tutor throughout your studies at Leeds, who will be an academic member of staff. You will have fortnightly academic tutorials with your tutor throughout your first two years, in your tutor group (of typically 5 students), as well as one-to-one meetings twice per semester. In addition, our excellent student support team is based close to where you’ll work and study to help with anything from academic advice to timetabling and project submission enquiries.
On this course you’ll be taught by our expert academics, from lecturers through to professors. You may also be taught by industry professionals with years of experience, as well as trained postgraduate researchers, connecting you to some of the brightest minds on campus.
Assessment
Entry requirements, fees and applying
Entry requirements
A-level: A*AA including Mathematics and either Physics or Chemistry, with the A* in Mathematics or Physics if presented.
Where an A-level Science subject is taken, we require a pass in the practical science element, alongside the achievement of the A-level at the stated grade.
Excludes A-level General Studies or Critical Thinking.
Admissions statement
Due to the competitive nature of this course, the Admissions team may take a variety of factors into account when assessing applications. Please read the admissions statement for further information.
Extended Project Qualification - Whilst we recognise the value, effort and enthusiasm applicants make in the Extended Project, we do not currently include this as part of our offer making. We do however encourage you to provide further information on your project in your personal statement and if invited, at interview.
GCSE: English Language at grade C (4) or above, or an appropriate English language qualification.
-
Access to HE Diploma
Pass 60 credits overall with 45 credits at Level 3, with Distinction, to include Mathematics, Calculus, Further Calculus and Physics or Chemistry.
-
BTEC
DDD (RQF) in an Engineering-related BTEC and grade A in A-Level Maths.
Please note - there may be different requirements for the older QCF BTEC's, please contact Admissions
-
Cambridge Pre-U
D2, D3, D3 including Mathematics and Physics or Chemistry, where the D2 must be in either Mathematics or Physics.
-
International Baccalaureate
36 points overall, with 18 points at higher level to include 6 points in higher level Mathematics and Physics or Chemistry.
-
Irish Leaving Certificate (higher Level)
H1 H1 H2 H2 H2 H2, including Mathematics and Physics or Chemistry where a H1 must be in either Mathematics or Physics.
-
Scottish Highers / Advanced Highers
AA at Advanced Higher level including Mathematics and Physics or Chemistry, and AAAAA at Higher level.
Read more about UK and Republic of Ireland accepted qualifications or contact the Schools Undergraduate Admissions Team.
Alternative entry
Were committed to identifying the best possible applicants, regardless of personal circumstances or background.
Access to Leeds is an alternative admissions scheme which accepts applications from individuals who might be from low income households, in the first generation of their immediate family to apply to higher education, or have had their studies disrupted.
Find out more about Access to Leeds and alternative admissions.
Typical Access to Leeds A Level offer: AAB including Mathematics and either Physics or Chemistry, with an A in Mathematics or Physics if presented.
Please note that the Access to Leeds offer is dependant on sucessful completion of the Access to Leeds Scheme.
For alternative qualification offers please contact the admissions team.
If you do not have the formal qualifications for immediate entry to one of our degrees, you may be able to progress through a foundation year. We offer a Studies in Science with Foundation Year BSc for students without a science background at A-level and an Interdisciplinary Science with Foundation Year BSc for applicants who meet specific widening participation criteria.
International Foundation Year
International students who do not meet the academic requirements for undergraduate study may be able to study the University of Leeds International Foundation Year. This gives you the opportunity to study on campus, be taught by University of Leeds academics and progress onto a wide range of Leeds undergraduate courses. Find out more about International Foundation Year programmes.
English language requirements
IELTS 6.0 overall, with no less than 5.5 in each section. For other English qualifications, read English language equivalent qualifications.
Improve your English
If you're an international student and you don't meet the English language requirements for this programme, you may be able to study our undergraduate pre-sessional English course, to help improve your English language level.
How to apply
Apply to this course through UCAS. Check the deadline for applications on the UCAS website.
International students apply through UCAS in the same way as UK students. Our network of international representatives can help you with your application. If you’re unsure about the application process, contact the admissions team for help.
Read about visas, immigration and other information in International students. We recommend that international students apply as early as possible to ensure that they have time to apply for their visa.
Academic Technology Approval Scheme (ATAS)
The UK Government’s Foreign and Commonwealth Office (FCO) operates a scheme called the Academic Technology Approval Scheme (ATAS). If you are an international (non-EU/EEA or Swiss citizen) applicant and require a student visa to study in the UK then you will need an ATAS certificate to study the four-year MEng, BEng course at the University of Leeds.
To apply for an ATAS certificate online, you will need your programme details and the relevant Common Aggregation Hierarchy (CAH) code and descriptor. For this course, the CAH code is: CAH10-01-04 and the descriptor is Aeronautical and Aerospace Engineering.
More information and details on how to apply for your ATAS certificate can be found at https://www.gov.uk/guidance/academic-technology-approval-scheme.
Applicant days
If you receive an offer to study with us, we’ll invite you to attend one of our applicant days. You’ll have the opportunity to meet our academic staff and students, explore the School and University and find out more about your course and what it’s like to be a student at Leeds.
Admissions policy
University of Leeds Taught Admissions Policy 2024
Fees
UK: See fees section below
International: £24,500 (per year)
Tuition fees for UK undergraduate students starting in 2023/24 and 2024/25
Tuition fees for UK full-time undergraduate students are set by the UK Government and will remain capped at £9,250 for 2023/24 and 2024/25. The fee may increase in future years of your course in line with inflation only as a consequence of future changes in Government legislation and as permitted by law.
Tuition fees for international undergraduate students starting in 2023/24 and 2024/25
Tuition fees for international students for 2023/24 and 2024/25 are available on individual course pages.
Tuition fees for a study abroad or work placement year
If you take a study abroad or work placement year, you’ll pay a reduced tuition fee during this period. For more information, see Study abroad and work placement tuition fees and loans.
Read more about paying fees and charges.
There may be additional costs related to your course or programme of study, or related to being a student at the University of Leeds. Read more on our living costs and budgeting page.
Financial support
If you have the talent and drive, we want you to be able to study with us, whatever your financial circumstances. There is help for students in the form of loans and non-repayable grants from the University and from the government. Find out more in our Undergraduate funding overview.
Career opportunities
Our degrees will equip you with the skills you need to succeed in industry, including design, problem solving, engineering ethics, numeracy and analysis skills, together with transferable skills, such as communication and working as a team. Graduates have secured positions including:
Flight Physics Engineer, Airbus
Graduate Engineer, BAE Systems
Project Engineer, Boeing
Graduate Engineer, British Airways
Graduate Engineer, Jaguar Land Rover
Graduate Engineer, Leonardo Helicopters
Graduate Scheme, Rolls Royce
Read our alumni profiles to find out more about where our students are working.
Careers support
You’ll have access to our dedicated Employability team, located centrally in our Employability Suite, who will provide you with specialist face-to-face support and advice to help you find relevant work experience, internships and year-in-industry placements, as well as graduate positions.
You’ll benefit from timetabled employability sessions, ongoing support during internships and placements, and presentations and workshops delivered by employers. The team also works closely with the University’s Careers Centre, which is one of the largest in the country.
Find out more about careers support and employability.
Study abroad and work placements
Study abroad
On this course you have the opportunity to apply to spend time abroad, usually as an extra academic year. We have over 300 University partners worldwide and popular destinations for our students include Europe, the USA, Canada, Australia, New Zealand, Singapore, Hong Kong, South Africa and Latin America.
Find out more on the Study Abroad website.
Work placements
With the help and support of our faculty Employability Team, you can choose to undertake an industrial placement year at one of the 100+ companies that we work with. If you decide to undertake a placement year this will extend your period of study by 12 months and, on successful completion, you will be awarded the ‘industrial’ variant in your degree title to demonstrate your added experience to future employers.
As a BEng student you have the option to undertake the placement between years 2 and 3. MEng, BEng students can choose to do this either between years 2 and 3 or years 3 and 4.
Find out more about work placements.